hi just wondering does anyone have 2 diagrmas of the main engine plug of a m50 and m50 basically im puttting a m50 into a car that had an m52.
i know it aint an e30 but i also need this info for my own 24v conversion for the plug
cheers.
wiring m50 and m52
Moderator: martauto
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
PM jimbob.
I forwarded him a copy of the wiring a few weeks ago.
I no longer have it due to PC failure!
I forwarded him a copy of the wiring a few weeks ago.
I no longer have it due to PC failure!

-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
If the car is meant to have an M50 engine the M52 wont need any extra work
-
finny_325i
- E30 Zone Newbie

- Posts: 28
- Joined: Thu Mar 03, 2005 11:00 pm
its an e36 it had an m52 but now has a m50.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
no problems then
-
ian332isport
- E30 Zone Team Member

- Posts: 5380
- Joined: Wed Dec 22, 2004 11:00 pm
- Location: West Sussex
Although you won't need the EWS module to run the M50, you will need to link out pins 1 & 3 on the EWS module to allow the starter to operate.
Ian.
Ian.
If it aint broke - Modify it...
-
finny_325i
- E30 Zone Newbie

- Posts: 28
- Joined: Thu Mar 03, 2005 11:00 pm
Thanks i just need a diagram for both engine plugs going into the bulkhead cause they dont match
