New to the forum E30 with a difference
Moderator: martauto
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
Hi, I'm new to the forum and my E30 323i is very different in that it is fitted in a Marcos sportscar c/w original 5 speed box.
As this unit only puts out 143BHP as standard, I want to swop motor for a 325i thereby increasing power to 170BHP.
Would appreciate any suggestions as to:-
a) Reputable sources to get a good secondhand motor
b) What to watch out for when inspecting such a unit
c) Will this unit fit straight onto my existing g'box (which came from the 323)
d) should I stick with fuel injection or swop to carbs
e) next step for increasing power....
Appreciate your vast knowledge on this site, many thanks.
MarcosBMW
P.S. How do I post a picture on this forum so you can see unit in the car??
As this unit only puts out 143BHP as standard, I want to swop motor for a 325i thereby increasing power to 170BHP.
Would appreciate any suggestions as to:-
a) Reputable sources to get a good secondhand motor
b) What to watch out for when inspecting such a unit
c) Will this unit fit straight onto my existing g'box (which came from the 323)
d) should I stick with fuel injection or swop to carbs
e) next step for increasing power....
Appreciate your vast knowledge on this site, many thanks.
MarcosBMW
P.S. How do I post a picture on this forum so you can see unit in the car??
-
ShineOn
- E30 Zone Newbie

- Posts: 210
- Joined: Mon Jan 15, 2007 11:00 pm
- Location: Basingstoke
Upload the picture to something like www.photobucket.com. Once you've done that, under the picture will be three links, copy and paste the bottom of the three tags into a post on here, and hey presto your picture will appear.
-
candyman
- E30 Zone Newbie

- Posts: 106
- Joined: Thu Jan 11, 2007 11:00 pm
- Location: kent
Hi marcos have good 129 k engine that you are welcome to hear running and purchase if u are near to kent !!
Stuart
Stuart
IF YOU CANT BE CAREFUL BE SIDEWAYS 
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Oooh that sounds tasty!MarcosBMW wrote:Hi, I'm new to the forum and my E30 323i is very different in that it is fitted in a Marcos sportscar c/w original 5 speed box.
As this unit only puts out 143BHP as standard, I want to swop motor for a 325i thereby increasing power to 170BHP.
The 'for sale' section on here, well established sellers like JonB, or checkout people's feedback in the feedback thread.Would appreciate any suggestions as to:-
a) Reputable sources to get a good secondhand motor
Cracked heads must be the main one! Oil mixing with water, mayo etc... If they tell you it's just had the headgasket done, chances are that wasn't the problem anyway. Unless you really trust the seller, it obviously makes sense to see it running first if possible...b) What to watch out for when inspecting such a unit
Erm... not 100% sure but I think so!c) Will this unit fit straight onto my existing g'box (which came from the 323)
Unless you're desperate for some old skool carb action, & accompanying gorgeous sound, injection really is better.d) should I stick with fuel injection or swop to carbs
E30zone chips, 6 branch manifolds, Big bore throttle bodies, air filters (decent ones), cams, maf / MS conversions, turbos...!e) next step for increasing power....
Not sure about the vast bit, but no prob!Appreciate your vast knowledge on this site, many thanks.
I use imageshack.us - it's pretty self explanatory! Just post the direct link between tags like this: {img}http://linktoyourpic.jpg{/img}, but use square [] brackets not curly {} ones.MarcosBMW
P.S. How do I post a picture on this forum so you can see unit in the car??
E30 in need of wiring loom smoke since April '11...
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
-
bimmaman
- E30 Zone Regular

- Posts: 698
- Joined: Tue Mar 28, 2006 11:00 pm
- Location: Devon
Nice...
I always thought they looked a little odd from behind though...
Got any other pics??
I always thought they looked a little odd from behind though...
Got any other pics??

-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
Nah!
I have one of those too, but it's in bits and powered by a F**d Xflow.
Don't think the wooden chassis will take the power etc of Beemer engine....... I'll just continue to "play" with this steel chassis car.
Ziggy, thanks for your advice and information, much appreciated

I have one of those too, but it's in bits and powered by a F**d Xflow.
Don't think the wooden chassis will take the power etc of Beemer engine....... I'll just continue to "play" with this steel chassis car.
Ziggy, thanks for your advice and information, much appreciated
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Now that looks sweet 
E30 in need of wiring loom smoke since April '11...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon

Considering Selling the Cabby, looks like its gonna go
-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
Marcos looks great.
Never seen an M20B23 looking like that though... is it on a custom intake system?
Never seen an M20B23 looking like that though... is it on a custom intake system?
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
CHeers cliffybabe(?)
I know when I'm not wanted, but sometimes it's nice to be different.
Hope you're not indicative of E30 owners in general.

I know when I'm not wanted, but sometimes it's nice to be different.
Hope you're not indicative of E30 owners in general.
-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
Huh?MarcosBMW wrote:CHeers cliffybabe(?)
I know when I'm not wanted, but sometimes it's nice to be different.
Hope you're not indicative of E30 owners in general.
Cliffy was drooling over your car dude!
I come from a background of kit cars... Dad and I have built a Hornet (first attempt at kitcar-dom... never again!), a Chesil and a Hawk 289.
Now he's a bit older, he's gone for a TVR...
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
Sorry, thought he was puking!!
Apologies cliffybabe
Intake system is "custom" out of necessity, to fit into engine bay area. Unfortunately KN filter will only fit behind radiator so when engine running hot it sucks in hot air, reducing power. Need to re-think that, but probably only after have updated to 325 power.
Thanks

Apologies cliffybabe
Intake system is "custom" out of necessity, to fit into engine bay area. Unfortunately KN filter will only fit behind radiator so when engine running hot it sucks in hot air, reducing power. Need to re-think that, but probably only after have updated to 325 power.
Thanks
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Welcome to the zone.
That's beautiful. An old customer of mine had an LM400 (i think?) which was awesome, he decided in his infinite wisdom to remove all silencers. Sounded mega
That intake looks interesting, I guess it's to drop the height of the engine over the std m20 inlet system. Does it still use the std air flow meter?
Keep us updated on your choice of engine.
That's beautiful. An old customer of mine had an LM400 (i think?) which was awesome, he decided in his infinite wisdom to remove all silencers. Sounded mega
That intake looks interesting, I guess it's to drop the height of the engine over the std m20 inlet system. Does it still use the std air flow meter?
Keep us updated on your choice of engine.

-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
"Does it still use the std air flow meter?"
It appears to, so I guess that might be a problem powerwise also. Having said that, because she weighs so little she still goes pretty well and with a custom stainless (mostly) exhaust, that 6 pot sounds very sweet.
I believe there are only two BMW-engined Marcos in the world.
I like her anyway
Will keep you updated on engine and F.I. Choice. Presently talking to Fritz Bits as Richard there seems very knowledgeable

It appears to, so I guess that might be a problem powerwise also. Having said that, because she weighs so little she still goes pretty well and with a custom stainless (mostly) exhaust, that 6 pot sounds very sweet.
I believe there are only two BMW-engined Marcos in the world.
I like her anyway
Will keep you updated on engine and F.I. Choice. Presently talking to Fritz Bits as Richard there seems very knowledgeable
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
I have a complete 325i engine and all anciliaries for sale
Where are you based? I assume SW area if your talking to Fritz'
Where are you based? I assume SW area if your talking to Fritz'
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
May be worth speaking to Ant about having megasquirt fitted when the new engine goes in. Then you can ditch the AFM flappy restrictive gayness and go to a MAF and the great throttle response that it brings. Also would enable you to get the best from what mods are fitted.

-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Megasquirt I think would help you get around any wiring incompatibilities that may exist between the 323i and 325i. It also alows real live tuning.

-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi
I see you are runing k-jet so i guess the engine is from a e21 323i, drop in a e30 2.5 and megasquirt and you will be about 180+ over the stock 140, the easy and quick bolt on upgrade.
Nice car by the way doess it have the adjustable brake pedals i always thought that was a nice touch on the Marcos.
That car needs a 2.7 if not more at least and if you are intrested i may have a set of tripple 45 webbers for sale soon (along with a 2.7 engine)
I see you are runing k-jet so i guess the engine is from a e21 323i, drop in a e30 2.5 and megasquirt and you will be about 180+ over the stock 140, the easy and quick bolt on upgrade.
Nice car by the way doess it have the adjustable brake pedals i always thought that was a nice touch on the Marcos.
That car needs a 2.7 if not more at least and if you are intrested i may have a set of tripple 45 webbers for sale soon (along with a 2.7 engine)
-
MarcosBMW
- E30 Zone Newbie

- Posts: 8
- Joined: Wed Feb 07, 2007 11:00 pm
Adjustable pedals including brakes and clutch, via a moving box, are absolutely essential.e21Jason wrote:Hi
I see you are runing k-jet so i guess the engine is from a e21 323i, drop in a e30 2.5 and megasquirt and you will be about 180+ over the stock 140, the easy and quick bolt on upgrade.
Nice car by the way doess it have the adjustable brake pedals i always thought that was a nice touch on the Marcos.
That car needs a 2.7 if not more at least and if you are intrested i may have a set of tripple 45 webbers for sale soon (along with a 2.7 engine)
Why? Because the seats fit straight into the body leaving no possible adjustment in the normal way.
Thus pedals are adjusted to suit driver.
Not sure about going to 2.7........ but does sound tempting with a set of Webers.....
Now I'm drooling
2.5 + megasquirt sounds more like it
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
MS running true Alpha N/MAP hybrid would mean no AFM or MAF, more power, better response and lots more room for a decent cold air feed.
M20B25 + MS= superb intake noise, ask MattG
Welcome to the zone BTW dude, JazzMan has a B25 in his Merlin Roadster
M20B25 + MS= superb intake noise, ask MattG
Welcome to the zone BTW dude, JazzMan has a B25 in his Merlin Roadster
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
-
andyp
- True Old Skooler
- Posts: 6899
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: LONDON
Hi mate and welcome,
your right it is different
your right it is different
-
drifty325i
- E30 Zone Regular

- Posts: 647
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Rangiora, New Zealand
Thats mint, would like to see more pics of the intake
The V8 in action http://www.youtube.com/watch?v=vp5Eaf8xOgM






