OBC - I can see the display faintly ....but

Need technical Q/A then you're in the right place

Moderator: martauto

Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Thu Feb 08, 2007 9:17 pm

no lights on buttons. Does this mean I just need the new bulbs? Will I then see display in daylight?

Thanks
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Thu Feb 08, 2007 9:24 pm

Yes, i think so! My car needs this doing also. For the display, you slide out the white backlight bar in the side of the obc which has two small bulbs soldered in (you can solder in new ones or white LEDs), or buy a complete unit from the stealers for around £22! The keyboard is lit by a twist-fit bulb in the back of the obc.

Getting the obc out is the tricky bit - held in by small hidden screws. :cry:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Thu Feb 08, 2007 9:28 pm

Thanks, sounds hopeful.

If I take out the radio, should be able to get access I guess. £22 will be just about bearable. I can see it works ok faintly from the stalk..
Selection of BMW hardtops available, please ask!
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Post Thu Feb 08, 2007 9:29 pm

i paid £25 for my light bar from barons. loosen all the nuts enough and u may be able to get at the lightbar without taking the whole thing outta the dash. the display is lit by the lightbar and the buttons by the twisty bulb.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Thu Feb 08, 2007 9:32 pm

Here's a handy thread regarding this: http://newling.no-ip.com/rep/bordcomput ... licht.html
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Thu Feb 08, 2007 9:32 pm

Thanks Tomtom...I'll be giving it a go.....
Selection of BMW hardtops available, please ask!
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Thu Feb 08, 2007 9:38 pm

It also helps to undo the glovebox restraining straps, allowing it to fully drop, then remove the small plastic trim piece to the left of the obc (allows you to get a small screwdriver in there to try and undo the screws holding the obc in place - you may also be able to reach the keyboard backlight bulb.) Also you can pull out the hazard warning switch and also removing the radio would help for gaining access. But it's a tricky job all the same!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Post Thu Feb 08, 2007 9:44 pm

i did mine with no switches or stereo in place and the two screws removed from where the hazard lights/ hrw switches are. u can bend the panel a fair bit without it snapping. a good tip is to use a screwdriver with a nice snug fit so hopefully not end up dropping the screws
Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Thu Feb 08, 2007 9:44 pm

Nice project job during Febuary though, when It doesn't see the road, unless its absolutely dry. It would be really nice to have this working.

now all I need to do is fix the small dents in my bootlid, and I'll be happy
Selection of BMW hardtops available, please ask!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Feb 08, 2007 10:23 pm

tomtomiS wrote:so hopefully not end up dropping the screws
Don't ever expect to see them again if you do!
Z3I
E30 Zone Addict
E30 Zone Addict
Posts: 3504
Joined: Tue Apr 25, 2006 11:00 pm
Location: By Brooklands, in the sunny south.

Post Thu Feb 08, 2007 10:29 pm

Reminds me of an old tip of always screwing up some masking tape under anything like the OBC, which has darknes under it from where nothing returns, when removong screws....
Selection of BMW hardtops available, please ask!
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Thu Feb 08, 2007 10:34 pm

Is it just the button illumination that is out? there is a single 12V 1.2W lamp for the button illumination, cost pennies to replace. The display illumination is the hard to swallow £22+ bit.
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Thu Feb 08, 2007 10:36 pm

You'll find it well worth fixing - there's some very handy functions on there such as fuel economy, outside temperature, stopwatch, etc. There's a small Phillips screw at each corner around the back. A bit of Blue-Tac on the end of the screwdriver is useful to avoid losing them.

This article might help:
http://www.pelicanparts.com/BMW/techart ... cement.htm

:idea:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Tue Feb 13, 2007 8:26 pm

Fixed the keyboard backlight in my 325i today; it's possible to do it without removing the obc, by removing the plastic trim to the left of the obc and using tweezers to untwist the bulb (and putting in the replacement the same way). :)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421