I have a 1989 325i.
i was told that they are supposed to have a cam chain is this true or is it a belt.
also i have smoke and oil coming out of exhaust, and a tapping from the head.
anyone help.
FEW QUESTIONS
Moderator: martauto
-
jondrift
- E30 Zone Regular

- Posts: 305
- Joined: Wed Feb 07, 2007 11:00 pm
exactly the same as my problem, ive been told its either a oil valve seal, or piston rings?
if you find out any different give me a pm! and i will do the same
cheers jonathan
if you find out any different give me a pm! and i will do the same
cheers jonathan
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
ag-1982
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: SE Kent
Are these easy enough to change myself, or am i better off taking to a mechanic?
How much would parts cost roughly along with any new bolts, seals etc i may have to replace.
cheers
How much would parts cost roughly along with any new bolts, seals etc i may have to replace.
cheers
-
suzie650
- E30 Zone Regular

- Posts: 460
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: CH
They need the engine to be stripped down (piston rings) or at least the head (valve stems seals)... And some specialist tooling. So if you didn't know what they were, I suggest that taking it to a mechanics is the best solution.
And I imagine that a replacement engine would be cheaper and more straightforward than a rebuild.
Are you sure it's oil from the exhaust? Otherwise (as you're talking about a knock from the head) , your valve clearance/timing might just be totaly out.
And I imagine that a replacement engine would be cheaper and more straightforward than a rebuild.
Are you sure it's oil from the exhaust? Otherwise (as you're talking about a knock from the head) , your valve clearance/timing might just be totaly out.
-
ag-1982
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: SE Kent
It could be oil all i know is its liquid and it is dark i know this cos i covered my neighbours car when i revved it the other day
If its just the timing is this easy enough to do, and while im doing this would it be worth changing the gasket and cleaning the injectors etc
And most important of all will it cost me much, dont mean to sound like a tight arse but my budget is getting really low, suppose that what you should expect from buying an old motor to put back on road lol.
If its just the timing is this easy enough to do, and while im doing this would it be worth changing the gasket and cleaning the injectors etc
And most important of all will it cost me much, dont mean to sound like a tight arse but my budget is getting really low, suppose that what you should expect from buying an old motor to put back on road lol.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Oil doesn't normally come out of the exhaust as a liquid! It comes out as blue smoke.
I expect all that you are seeing in a mixture of soot and water, and steam - normal products of combustion.
If this is a new car to you, then consider changing the cambelt, cambelt tensioner and water pump, unless you know that they've been done in the last couple of years. Otherwise, go and enjoy!
I expect all that you are seeing in a mixture of soot and water, and steam - normal products of combustion.
If this is a new car to you, then consider changing the cambelt, cambelt tensioner and water pump, unless you know that they've been done in the last couple of years. Otherwise, go and enjoy!
-
ag-1982
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: SE Kent
oh ok my bad
was just a bit worried thats all incase there was anything badly wrong with my engine.
dont know sod all about these cars, and thanks for all your help.
wheres the best place to buy new belts and pulleys and stuff anyhow.
dont know sod all about these cars, and thanks for all your help.
wheres the best place to buy new belts and pulleys and stuff anyhow.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
German Swedish and French, and Eurocarparts are the two main sources of BMW parts, apart from BMW dealers, of course.ag-1982 wrote:wheres the best place to buy new belts and pulleys and stuff anyhow.
BMW are a relatively small manufacturer and buy in a lot of their parts, often using more than one supplier. GSF and Eurocaparts both sell parts
made by at least one of these OE manufacturers, and this is indicated by the last digit of their part numbers.
The above two are usually cheapest on more common parts, but on other stuff, BMW can often be as cheap or cheaper.
-
ag-1982
- E30 Zone Newbie

- Posts: 114
- Joined: Thu Jan 04, 2007 11:00 pm
- Location: SE Kent
cheers mate nice one

