Changing rear crossmember/diff complete

Need technical Q/A then you're in the right place

Moderator: martauto

wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Feb 07, 2007 12:04 pm

Anyone done this?

Having a few probs with o/s rear wheel station, and as I'm gonna change the diff anyway, I thought about taking the whole lot off complete; diff, drive shafts, both wheel stations, suspension arms and crossmember. Leaving behind brake calipers, abs sensor, ARB, shocks.

As the diff is partially mounted in the cross member, I don't think this would be to difficult.


Any views/advise appreciated.
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Wed Feb 07, 2007 12:09 pm

Shouldn't be a problem. MIght as well take the brake calipers off with it, as they'll have to be disconnected anyway.
Image
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Feb 07, 2007 12:35 pm

Cheers Chris :D
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Wed Feb 07, 2007 12:46 pm

One word of advice - support the back of the diff whilst you free the beam bushes from the floorpan. If there's weight pulling down at the rear, the bolts can refuse to let go of the bushes.
Image