Right
Just debating with a mate in oz that e30 m3 throttle bodies are the same if not very similar in bolt pattern to the M30 intake.
SO.. what i'm asking is this.
Does anyone have any pics of the mounting side of an m3 e30 throttle body.. and an m30b35 intake/head?
He doesnt think he can make them fit without a spacer/adapter.
Can anyone help?
Also what would be required if he did fit this to his m30 (btw its in a 735.. They're strange in oz!!)
e30 m3 throttle body
Moderator: martauto
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
http://www.realoem.com/bmw/showparts.do ... g=11&fg=15
it looks just like the S38 port shape and bolt pattern to me, as you'd expect. it's nothing like the m30.
you will very likely need an adaptor plate, unless you cut the ends of the TBs off and weld them to M30 manifold stubs. either way it will be a royal pain in the arse
it looks just like the S38 port shape and bolt pattern to me, as you'd expect. it's nothing like the m30.
you will very likely need an adaptor plate, unless you cut the ends of the TBs off and weld them to M30 manifold stubs. either way it will be a royal pain in the arse

-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Cheers toby
hmm.. would he be better off getting dcoe itbs?
hmm.. would he be better off getting dcoe itbs?
-
ian332isport
- E30 Zone Team Member

- Posts: 5380
- Joined: Wed Dec 22, 2004 11:00 pm
- Location: West Sussex
He needs one of these:
http://www.bavariacars.com.au/products/ ... .php?id=32
Also happens to be in Oz
http://www.bavariacars.com.au/products/ ... .php?id=32
Also happens to be in Oz
If it aint broke - Modify it...
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
He knows about that.. Just wondering which is going to be easier/cheaper to do
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
m5 throttles ought to be cheaper
however that funky thing will definately be easier
however that funky thing will definately be easier

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
No idea whether it'll fit or not, but you can draw absolutely no conclusions from realoem or the ETK.Toby_Unna wrote:http://www.realoem.com/bmw/showparts.do ... g=11&fg=15
it looks just like the S38 port shape and bolt pattern to me, as you'd expect. it's nothing like the m30.
These diagrams are for identification purposes only, and may or may not bear any resemblance to the part they represent.
A part shown with a triangular 3 bolt flange may well have a four bolt rectangular flange, for example.
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
i know what you mean Brian, but in my experience that relates to parts where the shape and design doesn't matter and one part may have been superseded by another of a different shape - e.g. an exhaust pipe joining flange.
in this case, the 12v and 24v port shapes are necessarily totally different.
in this case, the 12v and 24v port shapes are necessarily totally different.

-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
the e30 m3 ports look the same as the m30, just the mounting seems different.
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
here you go

this is e34 m30 vs e28 s38 (which is actually upside down in the pic)
the 24v ports are quite a lot taller. mine have had the lower part filled in with weld before grinding back, and still needed a 20mm adaptor plate to get a smooth port shape. if i was starting from scratch again i'd seriously consider using bike TBs instead

this is e34 m30 vs e28 s38 (which is actually upside down in the pic)
the 24v ports are quite a lot taller. mine have had the lower part filled in with weld before grinding back, and still needed a 20mm adaptor plate to get a smooth port shape. if i was starting from scratch again i'd seriously consider using bike TBs instead

-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Is that the same for the s14 engine?Toby_Unna wrote:here you go
this is e34 m30 vs e28 s38 (which is actually upside down in the pic)
the 24v ports are quite a lot taller. mine have had the lower part filled in with weld before grinding back, and still needed a 20mm adaptor plate to get a smooth port shape. if i was starting from scratch again i'd seriously consider using bike TBs instead
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
I assume so. 

