Bottom End Rebuild

Need technical Q/A then you're in the right place

Moderator: martauto

SHAZ325iSPORT
E30 Zone Addict
E30 Zone Addict
Posts: 2360
Joined: Sat Mar 26, 2005 11:00 pm
Location: East London

Post Mon Feb 05, 2007 8:51 pm

right im going to get my bottem end rebuilt soon,want to get everything brand new,going to use a 325 bottem end and totally rebuild it.

right what i need to know is exactly what parts do i need to buy,if anyone knows(which i know you will) can you give me a full list of what exactly i need.

Also im going in the performance direction so light pistons etc etc will help me.will be buying these bits slowly slowly so this way wont hit the bank balance in a big way winkeye .

your help will be very helpful.

by the way i have a 325 head,with a 272/272 shrick cam which was rebuilt not long ago,reason for rebuild to bottem end is because its started to make a grinding noise so going to get it rebuilt now(fussy).

also if anyone has a bottem end which is bear or just a bottem end(even a rebuilt one)will buy if price is right.
Image
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Mon Feb 05, 2007 9:14 pm

You can buy two seal kits which cover everything sealingy that you'll need. Think they came to about £220 or so and include head gasket, valve stem seals and so forth and so on. You'll only need the bottom end one though if that's all you're rebuilding.

You'll need to have the crank inspected / reground and bearings to suit.
Have the block either just honed (if you're lucky) or rebored and honed.
If it's rebored you'll need oversized pistons and if you want lighter ones then this is the time to spec them up.
New rings
Pistons might come with gudgeon pins
Have the little ends inspected and replaced if necessary
New oil pump's a good idea
New oil pump drive
Main bolts,
Head bolts
Big end bolts

All in all, it cost me a grand to rebuild my M20 including all the machining and fitting of new valve guides etc. I was lucky as the block just needed honing and nothing needed regrinding etc.

Have fun, they're really nice engines to have apart so get stuck in and enjoy yourself :D
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Tue Feb 06, 2007 8:57 am

bro, if your going down the more power route, why not just turbo it??? will prob cost you same amount and standard internals on a good condition engine is good for 350bhp... only non stretch headbolts and oversized H/G required.... im now on 10.5psi winkeye
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Tue Feb 06, 2007 11:42 am

blingsta, how much power are you getting for 10.5psi?
cheers :)
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
DJ_B4L
E30 Zone Regular
E30 Zone Regular
Posts: 973
Joined: Sat May 14, 2005 11:00 pm
Location: Kent

Post Wed Feb 07, 2007 12:21 am

ant u got a 2.7 engine bruv
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS

Number plate for sale E30 2 HRD open to serious offers only will suit any E30
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Wed Feb 07, 2007 9:10 am

Morat wrote:blingsta, how much power are you getting for 10.5psi?
cheers :)
exact power not known at this stage.... have recently upgraded to a slightly bigger turbo than what i originally had and also a vortex exhaust system... will be getting it mapped tommorrow and then to rolling road to find out what she's pulling..... estimated at 250bhp (im hoping) :D