Need technical Q/A then you're in the right place
Moderator: martauto
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Mon Feb 05, 2007 11:43 pm
Well, the inevitable has happened.
I was given an engine for free, with suspected head gasket failure. Its not so much suspected as well and truly proven now. I cant really complain as it was free and I was warned, but after a days driving, teasing me as to what I was in for.... I want it fixed...NOW!
How much of a problem is it on these engines (325i lump)?
How likely is it i'll need the head skimmed? How likely is it that I can get my trained grease monkey to stick in a new head gasket and drive merrily on my way?
duke wrote:
I could throw a spastic round a corner with better precision
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Post
Mon Feb 05, 2007 11:46 pm
The worry is whether you have a cracked head....
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Mon Feb 05, 2007 11:48 pm
are you one of the warburtons that makes bread?
duke wrote:
I could throw a spastic round a corner with better precision
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Post
Mon Feb 05, 2007 11:49 pm
Time for some K seal.......
http://www.ksealit.com/
If the engine was free, then i can't see that you have anything to loose!
-
wildeian
- E30 Zone Regular

- Posts: 851
- Joined: Thu Mar 09, 2006 11:00 pm
- Location: Colchester, Essex
Post
Mon Feb 05, 2007 11:52 pm
No, he's one of the Warburtons that buys and sells e30 BMWs!!
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Mon Feb 05, 2007 11:52 pm
yup ,could be cracked head....crack/test and skim required on head...then if ok,reassemble with timing belt kit,waterpump,headgasket set etc....easy enough to do.check viscous fan and thermostat....replace if suspect or you may have to do all over again..
525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Mon Feb 05, 2007 11:53 pm
yeah someone else suggested that.... but...
I intend on giving this engine a lot of abuse so I need something that will hold up to that. K seal is fine as a temporary fix but under pressure its useless. I know, I used it on my last car and it lasted about an hour of me driving.

i seem to have a slightly heavy right foot.
duke wrote:
I could throw a spastic round a corner with better precision
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Mon Feb 05, 2007 11:54 pm
E30Mark wrote:Time for some K seal.......
http://www.ksealit.com/
If the engine was free, then i can't see that you have anything to loose!
makes me cringe.....just hiding a problem and can never rely on vehicle with this in......

525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Mon Feb 05, 2007 11:55 pm
gcorky wrote:yup ,could be cracked head....crack/test and skim required on head...then if ok,reassemble with timing belt kit,waterpump,headgasket set etc....easy enough to do.check viscous fan and thermostat....replace if suspect or you may have to do all over again..

sounds like a piece of cake
though to be honest it wont be me doing it anyway. The only concern I have with all that is the price lol.
duke wrote:
I could throw a spastic round a corner with better precision
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Mon Feb 05, 2007 11:58 pm
gcorky wrote:E30Mark wrote:Time for some K seal.......
http://www.ksealit.com/
If the engine was free, then i can't see that you have anything to loose!
makes me cringe.....just hiding a problem and can never rely on vehicle with this in......

k-seal and rac membership?
It only needs to last two months til the mot. If the car isnt rotten through or about to be condemned, I plan to source a low mileage 325/325 engine and put that in, but til then I dont really want to spend much more than, well, nothing....
Last edited by munky30 on Mon Feb 05, 2007 11:59 pm, edited 1 time in total.
duke wrote:
I could throw a spastic round a corner with better precision
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Post
Mon Feb 05, 2007 11:58 pm
im sure stu said croydon do a skim and presure test for 40quid


Considering Selling the Cabby, looks like its gonna go
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Mon Feb 05, 2007 11:58 pm
around 60 quid at local engine/machine shop up here for crack test/skim....plus 150 upwards for the rest...plugs/oil/filter/coolant etc...hmn can add up-but when its done its done innit

525 sport
-
Andy325i
- E30 Zone Addict

- Posts: 4052
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Avon
Post
Tue Feb 06, 2007 12:00 am
Start saving for a new head, if everything else is ok, buy a brand new BARE head and then fit your original cam etc (after getting it pressure tested.) Do your self a favour and avoid recon heads (Unless you like time wasted under the bonnet)
Better still pick up a cheap M50 B25 and live happily ever after.
Andy

M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:00 am
is it really worth doing all that to an engine thats already done 177k?
duke wrote:
I could throw a spastic round a corner with better precision
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Tue Feb 06, 2007 12:00 am
cliffybabe wrote:im sure stu said croydon do a skim and presure test for 40quid

4 cyl 6cyl....usually 10 per cylinder ?unless its vm engine etc ,where they treat each cylinder as an individual head.....
525 sport
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Tue Feb 06, 2007 12:03 am
simian wrote:is it really worth doing all that to an engine thats already done 177k?
m20 engine yes...when the heads off look at the bores,usually spot on....
525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:06 am
Andy325i wrote:Start saving for a new head, if everything else is ok, buy a brand new BARE head and then fit your original cam etc (after getting it pressure tested.) Do your self a favour and avoid recon heads (Unless you like time wasted under the bonnet)
Better still pick up a cheap M50 B25 and live happily ever after.
Andy
ok, I'm a simple creature. I only just worked out the 316 engine is an m10, and that the 325 one is an m20... what the hell is an m50 b25???
5 series??
duke wrote:
I could throw a spastic round a corner with better precision
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Post
Tue Feb 06, 2007 12:08 am
Next gen 24v 6cyl 2.5.
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:08 am
gcorky wrote:simian wrote:is it really worth doing all that to an engine thats already done 177k?
m20 engine yes...when the heads off look at the bores,usually spot on....
This has lifted my depression somewhat. I dont know what it means, but it sounds reassuring.
I dont mind spending a couple of hundred on it if its going to get me something that wont break for a while... i would rather not but if needs be I guess I can actually open my wallet for this car. Once I find the key to the padlock.
duke wrote:
I could throw a spastic round a corner with better precision
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Tue Feb 06, 2007 12:10 am
m50 ,e36,e34 325,525....
525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:10 am
Chris-W wrote:Next gen 24v 6cyl 2.5.
Thanks for clearing that up.

duke wrote:
I could throw a spastic round a corner with better precision
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:12 am
so, imagine you're speaking to a little old lady thats come into a garage saying her car is making a funny noise.
What should my first step be? get it pressure tested to see if the head is cracked?
duke wrote:
I could throw a spastic round a corner with better precision
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Tue Feb 06, 2007 12:14 am
simian wrote:so, imagine you're speaking to a little old lady thats come into a garage saying her car is making a funny noise.
What should my first step be? get it pressure tested to see if the head is cracked?
yup first logical step...check your own head then decide on your options from there.
525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:15 am
ok, thanks folks. I will get on it tomoro and pray for a cheap fix. Will keep you posted.
duke wrote:
I could throw a spastic round a corner with better precision
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
Post
Tue Feb 06, 2007 12:16 am
if head does turn out to be fubar....put a wanted up on here....usually around a 100 squid...check the feedback section for good sellers for reassurance,but see how yours is first

525 sport
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 12:24 am
will do. Though i think if I end up having to spend that amount I'll go the whole hog and get new bits, bring the tired old engine back to its former glory.
duke wrote:
I could throw a spastic round a corner with better precision
-
munky30
- 100% Pure Council
- Posts: 5388
- Joined: Thu Jan 18, 2007 11:00 pm
- Location: my own little world
Post
Tue Feb 06, 2007 8:30 pm
a small update.
I was going to go for the k seal option as a very temporary fix, mainly so it would drive to the places it will need to go to have work done on it...
But k seal needs heat to work, and the engine wont run for more than about 10 seconds.
So.... new gasket set has been ordered, haynes manual has been perused, and this weekend me and my mechanic friend will be hoping with everything crossed that the gasket is all it needs...
duke wrote:
I could throw a spastic round a corner with better precision
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Post
Tue Feb 06, 2007 8:42 pm
simian wrote:
m20 engine yes...when the heads off look at the bores,usually spot on....
This has lifted my depression somewhat. I dont know what it means, [/quote]It means that BMW know how to make engines!
Should be at least another 100k in it at least. It ain't a Ford!
Most 316s are M40s by the way.