New member first post
Moderator: martauto
-
666JSB
- E30 Zone Newbie

- Posts: 65
- Joined: Sun Feb 04, 2007 11:00 pm
- Location: Vancouver Island Canada
New member, just acquired a 1991 Euro Spec LHD E30 MTech 325iS 2 door Japanese import here in Canada.
Not new to BMW's - I owned an E34 from new Sept 92' bought in South Africa which I imported to UK in 99' and sold shortly before leaving for Canada 2005. Also had E36, E46, & E39 cars over the last 10 years.
My E30 has only done 57,000Km and it shows in the interior & exterior condition. I am wondering about the cambelt and I was thinking of biting the bullet and having it replaced rather than taking any chances.
Does anyone know of any way to check the cambelt condition easily - as the vehice has recently arrived from Japan I do not have access to the service history. Even the handbook was all in Japanese!
Many thanks, Neil.
Not new to BMW's - I owned an E34 from new Sept 92' bought in South Africa which I imported to UK in 99' and sold shortly before leaving for Canada 2005. Also had E36, E46, & E39 cars over the last 10 years.
My E30 has only done 57,000Km and it shows in the interior & exterior condition. I am wondering about the cambelt and I was thinking of biting the bullet and having it replaced rather than taking any chances.
Does anyone know of any way to check the cambelt condition easily - as the vehice has recently arrived from Japan I do not have access to the service history. Even the handbook was all in Japanese!
Many thanks, Neil.
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
Firstly, welcome to the Zone fella - hope you enjoy it here.
Secondly, above the alternator is a Black rubber dust shield covering a void into the cam belt area, rather fiddly to check condition of it through this void but can be achieved by removing the AFM + air box - pull the tabs back on the rubber shield to remove it and the use of a small mirror + small fingers.
The other way is to strip down the dizzy cap, rotor arm, plastic dizzy dust shield, loosen alternator bracket remove the metal coolant pipe (draining the coolant from the system) remove the 10mm + 13mm nuts holding in the top timing cover + slide the top timing cover out to reveal the belt.
Hope this helps you out.
Neil
Secondly, above the alternator is a Black rubber dust shield covering a void into the cam belt area, rather fiddly to check condition of it through this void but can be achieved by removing the AFM + air box - pull the tabs back on the rubber shield to remove it and the use of a small mirror + small fingers.
The other way is to strip down the dizzy cap, rotor arm, plastic dizzy dust shield, loosen alternator bracket remove the metal coolant pipe (draining the coolant from the system) remove the 10mm + 13mm nuts holding in the top timing cover + slide the top timing cover out to reveal the belt.
Hope this helps you out.
Neil
-
666JSB
- E30 Zone Newbie

- Posts: 65
- Joined: Sun Feb 04, 2007 11:00 pm
- Location: Vancouver Island Canada
Thanks for the greeting and the info', I will give your first suggestion a go as it's less intrusive. From then on I will decide whether to take it further and dismantle more as suggested, maybe with the parts on hand in preparation for just doing the job so I can forget about that issue for some time.
I just gotta get to know my new toy intimately so I can figure out what little jobs need doing to make sure it's in tip-top running condition.
I just gotta get to know my new toy intimately so I can figure out what little jobs need doing to make sure it's in tip-top running condition.
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Welcome to the 'zone
Spookily a very good friend of mine is preparing to emigrate to Vancouver Island
He wants to go skiing on Mt Washington erm constantly as far as I can make out. What do you do for a job in such a place, if you don't mind me asking?
Spookily a very good friend of mine is preparing to emigrate to Vancouver Island
He wants to go skiing on Mt Washington erm constantly as far as I can make out. What do you do for a job in such a place, if you don't mind me asking?
-
666JSB
- E30 Zone Newbie

- Posts: 65
- Joined: Sun Feb 04, 2007 11:00 pm
- Location: Vancouver Island Canada
Thanks for the welcome. Vancouver Island is a touristy place although there is some industry with logging & sawmills, paper & pulp mills and a fair amount of fishing (salmon) process plants. The capital of British Columbia, Victoria is here on the Island.
Mount Washington is 1 hr away from where I am based straight along the highway. Your friend will be able to ski & snowboard Dec - April. In the summer the resort is used for mountain biking. Just across in mainland Vancouver there is Grouse Mountain, Mount Seymour and Cypress Mountain - all within 20 mins of the ferry terminal (1 1/2 hr crossing from here to Vancouver) and Whistler is 1 1/2 hrs further North up the coast.
Me - I am a GM of two electrical/mechanical service shops predominantly repairing electric motors & associated equipment. Consequently all of the aforementioned industries and all of the resorts are clients as they all use electrical machinery and rely upon us to service & monitor condition for them.
I was born & bred in Liverpool, served my time as an apprentice in the service industry and have travelled about a bit incl' South Africa @ 19 yrs and I moved here Sept' 2005 - absolutely love the place, can't think of anywhere else I would want to live it's so pleasant & easy going.
Neil.
Mount Washington is 1 hr away from where I am based straight along the highway. Your friend will be able to ski & snowboard Dec - April. In the summer the resort is used for mountain biking. Just across in mainland Vancouver there is Grouse Mountain, Mount Seymour and Cypress Mountain - all within 20 mins of the ferry terminal (1 1/2 hr crossing from here to Vancouver) and Whistler is 1 1/2 hrs further North up the coast.
Me - I am a GM of two electrical/mechanical service shops predominantly repairing electric motors & associated equipment. Consequently all of the aforementioned industries and all of the resorts are clients as they all use electrical machinery and rely upon us to service & monitor condition for them.
I was born & bred in Liverpool, served my time as an apprentice in the service industry and have travelled about a bit incl' South Africa @ 19 yrs and I moved here Sept' 2005 - absolutely love the place, can't think of anywhere else I would want to live it's so pleasant & easy going.
Neil.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
yeah he's been telling me all this - he mountain bikes as well666JSB wrote:Mount Washington is 1 hr away from where I am based straight along the highway. Your friend will be able to ski & snowboard Dec - April. In the summer the resort is used for mountain biking. Just across in mainland Vancouver there is Grouse Mountain, Mount Seymour and Cypress Mountain - all within 20 mins of the ferry terminal (1 1/2 hr crossing from here to Vancouver) and Whistler is 1 1/2 hrs further North up the coast.
ahhh you do a proper job - he writes computer software!666JSB wrote: Me - I am a GM of two electrical/mechanical service shops predominantly repairing electric motors & associated equipment. Consequently all of the aforementioned industries and all of the resorts are clients as they all use electrical machinery and rely upon us to service & monitor condition for them.
I was born & bred in Liverpool, served my time as an apprentice in the service industry and have travelled about a bit incl' South Africa @ 19 yrs and I moved here Sept' 2005 - absolutely love the place, can't think of anywhere else I would want to live it's so pleasant & easy going.
Neil.
I'm sure he'll love it; we just can't see him making ends meet
-
Geoff
- Old Skooler

- Posts: 695
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sevenoaks
Welcome to the Zone buddy!
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Welcome,
I'm sure there will be a few volunteers to come over and give you a hand to change your cam belt...
I've only ever seen Montreal Airport and Ottawa in Canada.... not the greatest places on earth to work, never got to see any ot the 'real' Canada, maybe i will one day, if you need an electrician give us a bell
If your in doubt of the cam belt, play it save and get it changed. It's not too big a job, but it's worth changing a few other bits ie water pump etc
Have a nice day
I'm sure there will be a few volunteers to come over and give you a hand to change your cam belt...
I've only ever seen Montreal Airport and Ottawa in Canada.... not the greatest places on earth to work, never got to see any ot the 'real' Canada, maybe i will one day, if you need an electrician give us a bell
If your in doubt of the cam belt, play it save and get it changed. It's not too big a job, but it's worth changing a few other bits ie water pump etc
Have a nice day
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Welcome to the Zone Neil....Excellant to see more people from abroad tbh.
Pal

Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
666JSB
- E30 Zone Newbie

- Posts: 65
- Joined: Sun Feb 04, 2007 11:00 pm
- Location: Vancouver Island Canada
Thanks, I guess like me you're a Red hey?
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
Neil,666JSB wrote:Thanks, I guess like me you're a Red hey?
I have 2 passions in my life E30's and Liverpool FC, LFC is the first one tbh, always a RED mate, my dad made me support them, from day dot...There is NO other team....
Do you get to watch all the games?? LFC Vs The Other Blue Scum on the weekend...We should have won
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
666JSB
- E30 Zone Newbie

- Posts: 65
- Joined: Sun Feb 04, 2007 11:00 pm
- Location: Vancouver Island Canada
Yeah I was up early and watched it here, we are GMT < 8hrs. We generally get two or three games at the weekend. Hockey is the big sport here along with the football (don't know why they call it football when they hardly use their feet????). Had to put up with the superbowl all afternoon yesterday as well.
I was born & bred down on Scotty Rd and as a kid I used to walk to the match and we would go in the Pen for 6d, then climb over into the Kop. Givin' me age away now hey?
Cheers, Neil.
I was born & bred down on Scotty Rd and as a kid I used to walk to the match and we would go in the Pen for 6d, then climb over into the Kop. Givin' me age away now hey?
Cheers, Neil.
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
That is way before my time buddy666JSB wrote:Yeah I was up early and watched it here, we are GMT < 8hrs. We generally get two or three games at the weekend. Hockey is the big sport here along with the football (don't know why they call it football when they hardly use their feet????). Had to put up with the superbowl all afternoon yesterday as well.
I was born & bred down on Scotty Rd and as a kid I used to walk to the match and we would go in the Pen for 6d, then climb over into the Kop. Givin' me age away now hey?
Cheers, Neil.
So I suppose getting to a game is pretty much out of the question then....The last time I got some tickets, was earlier this season, when we played Reading, staying on hold for approx half hour + to try to get some tickets can be a pain to say the least.
There's quite a few people from overseas on the lfc forum I use, Canada included. Branching out
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
Another LFC'er is me ...
... and welcome to the zone
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
blingsta wrote:Another LFC'er is me ...![]()
![]()
... and welcome to the zone
Get in there...
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
I've been to Cypress Mountain. Vancouver rocks, one of the only places I've been to that I feel I could actually live in. Welcome to the zone mate! Had familoy in Maple Ridge, quite liked Coquitlam
-
bobafett
- E30 Zone Regular

- Posts: 285
- Joined: Tue Dec 12, 2006 11:00 pm
- Location: Bristol
Welcome to the zone, if you ever need any help in looking after your car give me a pm, then buy me a flight ticket, hotel accomadation and plenty of beer tokens and i'm all yours !
Do the cambelt mate don't take any chances it doesn't take that long to do or cost too much either..
Again welcome from all in Bristol. Cheers mate Darren..
Do the cambelt mate don't take any chances it doesn't take that long to do or cost too much either..
Again welcome from all in Bristol. Cheers mate Darren..
What ?! Drive straight officer......It's an E30 !
It's the Ultimate Drifting Machine.
It's the Ultimate Drifting Machine.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi and welcome to the zone. 

-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Welcome,
fwiw, I'd change the cambelt unless you know for sure its less than 30k miles or 3 years old. I know you can take a cambelt out to 5 years but I really wouldn't on an interference engine like the M20. Its just not worth it when you have to replace the valves and pistons.
Canada is fantastic. I've been to Calgary and up in the rockies in Alberta. And a small place called Medicine Hat which I'm sure some Brits will have heard of
I'd emigrate if I had a job there.. no question.
fwiw, I'd change the cambelt unless you know for sure its less than 30k miles or 3 years old. I know you can take a cambelt out to 5 years but I really wouldn't on an interference engine like the M20. Its just not worth it when you have to replace the valves and pistons.
Canada is fantastic. I've been to Calgary and up in the rockies in Alberta. And a small place called Medicine Hat which I'm sure some Brits will have heard of
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!

