Any 323i Experts Out There???
Moderator: martauto
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
All the tech info I can find lists early 323i engines as 138bhp. The same info lists late ones as 150bhp.
Where did the extra 12bhp come from?
I've checked ETK and the 'head, camshaft and pistons are the same right through.
Is it something to do with fueling or ignition?
I'd always thought it was increased compression in the later cars.
Any light shed on this appreciated fellas.
TIA
Stuart.
Where did the extra 12bhp come from?
I've checked ETK and the 'head, camshaft and pistons are the same right through.
Is it something to do with fueling or ignition?
I'd always thought it was increased compression in the later cars.
Any light shed on this appreciated fellas.
TIA
Stuart.
-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
uh ohh your thinking 323 again arent you stu 
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
If my memory is correct
the very early ones were 139 brake, which was silly as the 320 was just as fast and alot cheaper! so pretty early on BMW added a bit of omph to the 2.3 to widen the gap in performance, better cam and a few other bits.
Most 323's that are left are 150 jobbies very few 139's were made, these 139 cars would be X,A platers
the very early ones were 139 brake, which was silly as the 320 was just as fast and alot cheaper! so pretty early on BMW added a bit of omph to the 2.3 to widen the gap in performance, better cam and a few other bits.
Most 323's that are left are 150 jobbies very few 139's were made, these 139 cars would be X,A platers
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
My B plate ('85) 323i was a 150Bhp model did they ever make a 139bhp E30? i thought the lower power engine was from the E21's.
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i'm sure they did when they introduced the E30 it didn't stay in production long though
-
kidsinister
- E30 Zone Regular

- Posts: 755
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Oldham, Lancs.
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Dont know what mine is how can you tell 139 bhp or 150 bhp ?
but by the way it goes I would think its 150 bhp.
but by the way it goes I would think its 150 bhp.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
They were 139 bhp up until 09/1983. 
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
does it matter?! it's still slower than a 2.5 
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
Simon, f**k off with your smartarse comments.Simon13 wrote:does it matter?! it's still slower than a 2.5
I asked a question and if you don't have the answer butt-out.
Can't you get it through your stupid thick skull that not everyone is interested in 325i's?
Why don't you start a 325i+ Zone and leave the rest of us to what we want.
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Its only got 1 part number for the ECU but I am sure there was 2 diffrent onesI've checked ETK and the 'head, camshaft and pistons are the same right through.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
get f**ked, last time i help you out. i thought you had humour 
-
kidsinister
- E30 Zone Regular

- Posts: 755
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Oldham, Lancs.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
right last time i help you stewart
139bhp M20 in production for a year
then onto 150bhp, achieved through a different cam, inlet manifold diameter and length changes and a 2 stage distributor
139bhp M20 in production for a year
then onto 150bhp, achieved through a different cam, inlet manifold diameter and length changes and a 2 stage distributor
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
right last time i help you stewart
139bhp M20 in production for a year
then onto 150bhp, achieved through a different cam, inlet manifold diameter and length changes and a 2 stage distributor
139bhp M20 in production for a year
then onto 150bhp, achieved through a different cam, inlet manifold diameter and length changes and a 2 stage distributor
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
I want to know how much bhp you can get from a 2.3
I am thinking about a cat cam
2.5 inlet maifold and TB
got the 6 branch
Later injection / ign system so it can be mapped (173 ECU)
2.5 valves in the 2.3 head.
I am thinking about a cat cam
2.5 inlet maifold and TB
got the 6 branch
Later injection / ign system so it can be mapped (173 ECU)
2.5 valves in the 2.3 head.
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
If you thought you know the answer, why didn't you state it instead of being a tit?Simon13 wrote:right last time i help you stewart
139bhp M20 in production for a year
then onto 150bhp, achieved through a different cam, inlet manifold diameter and length changes and a 2 stage distributor
On my (2005) copy of ETK, the cams are all the same and I can only find two different distributors. Everything else I can think of that would make a difference to the power output has the same part number from day 1 to the end of production. That's why I asked the question.
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
If you go for a 282 cam Ed, I can't see why you wouldn't see over 165, maybe even 170.ed325i wrote:I want to know how much bhp you can get from a 2.3
I am thinking about a cat cam
2.5 inlet maifold and TB
got the 6 branch
Later injection / ign system so it can be mapped (173 ECU)
2.5 valves in the 2.3 head.
Theoretically, it should be torquier than the 2.5 because of the longer stroke.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
your welcome
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
bigkev
- E30 Zone Regular

- Posts: 612
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: hibernating till summer
essbee i dont know if you can get an alpina cam anymore but my C1 is rated at 170hp, which to be honest i find hard to believe as i cant see a cam giving 20hp alone, i took the head off a while ago and there was next to nothing done on the ports etc , I gave the head a proper flow and blueprinted the manifolds redid all the valves new leads dissy cap etc and its running loads better now (a lot quicker than a 325i
) pulls strong right up to 7500rpm .Personally i wouldnt bother with the valves from the 325i as its a lot of work and money for very little or no gain (you also might loose some midrange)
I dont know if Alpina did anything to the bottom end as far as pistons go though i did notice my pistons were convex
Get it ready for the POD and we'll show these 325's the way forward
I dont know if Alpina did anything to the bottom end as far as pistons go though i did notice my pistons were convex
Get it ready for the POD and we'll show these 325's the way forward
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
The factory fit cam is a 252. I read somewhere that the Alpina cam is a 268. I can't make-up my mind on cam spec yet, I haven't ruled-out using a standard one. At some stage, I may talk to Kent about doing me a one-off.
I know I'll be using 9.8:1 pistons and leaving the 'head totally standard.
I'm not bothered about top-end power, I couldn't care less what the bhp figure is (although I may get it dyno'd just for curiositys sake).
What I'm ultimately after is as much mid-range as possible without going below 30mpg touring consumption - that's why I won't do a 2.7.
I know I'll be using 9.8:1 pistons and leaving the 'head totally standard.
I'm not bothered about top-end power, I couldn't care less what the bhp figure is (although I may get it dyno'd just for curiositys sake).
What I'm ultimately after is as much mid-range as possible without going below 30mpg touring consumption - that's why I won't do a 2.7.
-
kidsinister
- E30 Zone Regular

- Posts: 755
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Oldham, Lancs.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the 2.7 engine route properly done is the only M20 engine bar the standard eta engine that will do 30mpg and not be a roadblock
Alpina always fit higher comp mahle pistons they are also lighter normally too
Alpina always fit higher comp mahle pistons they are also lighter normally too
-
bigkev
- E30 Zone Regular

- Posts: 612
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: hibernating till summer
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse



