at my whits end

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
pgtips
E30 Zone Newbie
E30 Zone Newbie
Posts: 2
Joined: Fri Feb 02, 2007 11:00 pm

Post Sat Feb 03, 2007 5:23 pm

hi there. i have just bought 320i se on a G plate the problem i have got is when i am driving at low speeds or the engine is at low revs i get a knocking sound coming from the heater valve / heater matrix area. if i increase the speed or the revs of the car the knocking sound stops but also so dose the heat. i have replaced the heater valve but still the knocking noise continues. please help.
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Sat Feb 03, 2007 5:55 pm

sounds like the heater pipes could be on the wrong way around. It does make a difference, I'm sure someone will back me up on this one.

john
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Sat Feb 03, 2007 7:22 pm

As John said above, this is the classic symptom of heater hoses the wrong way around. Swap them around at the bulkhead, and you should be good to go.

Ian.
If it aint broke - Modify it...
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 03, 2007 10:19 pm

They often get put on the wrong way around, because the way around that they look right is the wrong way.