Seat repair

Need technical Q/A then you're in the right place

Moderator: martauto

Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Feb 03, 2007 1:20 pm

The driver's cloth seat in my e30 has a very worn base and side bolster. I recently bought a good spare passenger seat. How difficult is it to swap the base and back over into the driver's seat, or is it easier to convert the driver's mechanism & seatbelt onto the passenger seat?

Thanks!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Sat Feb 03, 2007 1:27 pm

I don't envy you, I have fresh new unworn bolsters to put on my drivers seat, just can't bring myself to do it!

and the longer I have crappy ones the less damage I'm doing to the replacemebt bolsters.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Feb 03, 2007 1:32 pm

So it's quite a mission then? :roll:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 03, 2007 1:35 pm

The backs swap over in a matter of minutes, especially if they're the non folding type from a four door or touring.
Very simple to swap the seat belt fixing as well. Just leaves the adjusters on the wrong sides to give the game away.
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Sat Feb 03, 2007 1:36 pm

yeah, get some long nedle nose pliers before you start.

they are attatched by folding pins and if you have to do it by hand its gonna hurt, I think someone told me you could buy the retriming kit with the right tools from BMW or upholsterers.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Feb 03, 2007 1:39 pm

Thanks. Alas, I have the 2-door reclining type...are they alot more awkward to swap over? Also, is it easier to swop base and back from good seat to bad, or swop the mechanism from bad seat to good?

Cheers,
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Feb 03, 2007 1:55 pm

Still easy! Doesn't matter if the replacement bases are from a non tipping type - the mechanism is all there - just the cables/levers are missing.
march109 hasn't read the OP properly - he's on about re trimming the seats, not swapping for good ones.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Feb 03, 2007 3:06 pm

OK, cheers for the advice - sounds reasonably easy at least... :)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421