whats the largest size rim i can fit to my cab???

[phunt]

whats the largest size rim i can fit to my cab 320 with out any problems with handling or drive. any thoughts much app.

[cliffybabe]

Anything is possible with enough money, what sixe do u have in mind

[ShineOn]

I think E30's start looking silly and out of proportion beyond 17" rims, with 15" & 16" being just right in my opinion. Its not a big car, so the really big wheels look end up making it look like a cartoon car.

Will totally destroy the ride as well, and it won't do the handling many favours either!

[phunt]

i was thinking about 17" what about the width??, mine has the original 15" bbs's on it at the moment which are a bit chewed up from the old owner!!

[spence_star]

17s are fine, with the correct drop in suspension. no rubbing

[cliffybabe]

im running 17's with a 40mm drop with new mtec shochs up front

[clubfx2]

I have 8j wheels with a 25mm spacer on rear and 20mm on front, running a 225 on rear and a 215 up front, in my opinion looks phat and handles A1, I haven't rolled the arches and is lowered 40mm without any rubbing.

Send some pic's once you have figured out what you doing...

Good Luck!!!

[TW166Y]

im running 60/40 setup with 16x9j alloys. Rear arch mods are needs but it looks sick as fook

[clubfx2]

TW16, got any pic's???

[riklusby]

I had 16jx8 on front, 16x9j on the back and only had to roll th arches slightly, now i went an put 25mm spacers behind the 8js on the front and 65mm spacers behind the 9js on the rear and cut the arches off

[spence_star]

17s with a 40mm drop.

[bootyman]

All babies. I have 18x12 rear and 18x10 fronts on the Rieger and 17x11 rear and 17x10 fronts on my Msport. Now that's big rims