Need advice in how to stop soggy rear footwells (Pics inc)

Need technical Q/A then you're in the right place

Moderator: martauto

SilverShadow
Hartge Crew
Posts: 1362
Joined: Sun Jan 16, 2005 11:00 pm
Location: London

Post Thu Feb 01, 2007 9:51 am

The other night I dropped my mobile phone in the rear footwell of my car, when I picked it up I noticed that the carpets were totally drenched! After I had stopped panicking, I decided to strip the carpets at 8pm on my front drive. First I was cautious as I didn't want to see what was lurking beneath the carpet. :cry:

I was pretty amazed that there was no rust, but a stinky puddle of water! I noticed that there is sort of cap in the footwell that somebody has tried to fill up with some sort of sealant! I tried to drain out all the excess water from the carpets and saw water leaking onto the ground from this cap!

Can any one suggest what I should use to seal it from the inside and outside?? I was thinking of wax oiling the outside?

I now some people have said to weld a plate over it, but I don't want to go down this route?

Image

Image

Image

Any feed back much appreciated
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Feb 01, 2007 11:10 am

Take the plates out by turning them anticlockwise (?) a little, clean everything up and see if any of the tabs that locate it, or the part of the body that they engage with, have rusted away. If all is good, re seal them in with, preferably, 3M brush on sealer.
If anything is rusted, then welding permanent plates is the easiest route.
SilverShadow
Hartge Crew
Posts: 1362
Joined: Sun Jan 16, 2005 11:00 pm
Location: London

Post Thu Feb 01, 2007 11:18 am

Cheers Brian for the feedback mate.

I will have to strip down the current sealer thats on it at the mo, to give it a clean??

Are these plates still available from the stealers, ETK is down???

What are these plates for, other than to give problems??
Image
User avatar
eoiny
E30 Zone Newbie
E30 Zone Newbie
Posts: 51
Joined: Mon Jan 22, 2007 11:00 pm
Location: Dublin,Ireland

Post Thu Feb 01, 2007 6:29 pm

Just bought a 325 sport recently and i have the exact same problem,so it must quite common with these cars!only things is its happening at the front two footwells as well,the car is lowered 60mm so it has obviously taken a bang or 2 underneath in its day,just trying to get the money together to get it back the way it should be!best of luck and let me know how you get on!eoin.
User avatar
Pyros
E30 Zone Newbie
E30 Zone Newbie
Posts: 168
Joined: Mon Oct 30, 2006 11:00 pm
Location: Peterborough

Post Thu Feb 01, 2007 9:00 pm

the holes are from when the car was paint dipped in the factory, all they are are drains for the paint to flow out of the car, they are not needed and would recommend to get them welded up thats what im doing to mine at the moment
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Thu Feb 01, 2007 9:08 pm

Where's the water coming from though?

On mine it seems to be the sunroof drains where the exit into the cill.

However, since I discovered that the carpet weighs almost 15kg, I decided to leave it out....and the back seats.....and then insued the pain in the arse that is informing the insurance company and filling out the forms they send though :(
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Thu Feb 01, 2007 9:14 pm

the noise with no carpet is shocking and no rear seats all aiding the tail end get lighter!
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Fri Feb 02, 2007 7:45 am

Isn't that loud IMO, adds to the sensation of speed :D

Can't argue with the tail-end lightening effects though :o

Does make quite a marked difference to steering and braking though carrying less mass.
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange