Timing Belt m20 Engine
Moderator: martauto
-
bmw2006
- E30 Zone Newbie

- Posts: 39
- Joined: Sun Jul 02, 2006 11:00 pm
Hey, I've got an 89 520i with the m20 engine, At how many miles should the timing belt be replaced ?
Many Thanks
Many Thanks
-
ajm-e30
- E30 Zone Regular

- Posts: 472
- Joined: Sat Nov 11, 2006 11:00 pm
- Location: newport,land of sheep sh***ers
every 60'000 miles mate with a new water pump too

-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
I'd say 40k miles max - personally I wouldn't go over about 25 just for peace of mind! Easy job when you know what you're doing...
E30 in need of wiring loom smoke since April '11...
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
Fancy doing an idiot proof guide for those of us like me, who don't have a clue?? with pics.Ziggy wrote:I'd say 40k miles max - personally I wouldn't go over about 25 just for peace of mind! Easy job when you know what you're doing...
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
No real need... 
http://www.bmwe34.net/e34main/Maintenan ... Timing.asp
http://www.angelfire.com/blues2/bimmer/ ... gbelt.html
http://www.bmwe34.net/e34main/Maintenan ... Timing.asp
http://www.angelfire.com/blues2/bimmer/ ... gbelt.html
E30 in need of wiring loom smoke since April '11...
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
cheers dude!
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
depends on use ,age ,mileage in the real world....i would personnaly renew at 30 k ish-cost of replacement is peanuts compared to a snaped belt...
vauxhall put the same engine into 2 models,a hatch and a larger saloon an were puzzled by the smaller cars belt life as it was reduced in comparrison with larger car.....it was down to driving style ,the stop start city type hatch would wear out the cambelt quicker than the rep mobile motorway used vehicle...not a lot of people know that!
vauxhall put the same engine into 2 models,a hatch and a larger saloon an were puzzled by the smaller cars belt life as it was reduced in comparrison with larger car.....it was down to driving style ,the stop start city type hatch would wear out the cambelt quicker than the rep mobile motorway used vehicle...not a lot of people know that!
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
dont forget its not just milage that dictates when to change a belt, they are normally only good for 5 years without turning a wheel! and the new belts will have an expiry date on the packet... do not buy an old one!!
and finally never reuse a timing belt once installed.
mrlee
and finally never reuse a timing belt once installed.
mrlee

-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
I reckin mines well gone that, came with no history and I must have put 10k on it. Its well over due.
Most my driving is Mway though, will get it sorted ASAP,
Most my driving is Mway though, will get it sorted ASAP,
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
woohoo, more good news
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Good point there chris......i dont think i have ever heard of a cam belt going just as you off of the drive !!!Chris-W wrote:If it's overdue that just means you'll be doing 70ish when it goes!
Ive had 2 belts go on me, both different cars, Rover & Vauxhall, both went @ 50Mph+ Miles from home !!!!!
Why is that ???
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
got one in my garage with a snapped belt .....bmw service history and it lasted 50k then bang.....
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
I had one go in the outside lane of the M20 in my Fiat Coupe. Total nightmare. Getting accross from the outside lane was scary as I gradually lost speed and noone wanted to give way.....
£2k later I was rolling with 16 new valves :/
Suffice to say, both my E30s had a new cambelt the first week after I bought them.
£2k later I was rolling with 16 new valves :/
Suffice to say, both my E30s had a new cambelt the first week after I bought them.
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
What were you doing in the outside lane of a motorway in a Fiat, anyway?Morat wrote:I had one go in the outside lane of the M20 in my Fiat Coupe.
Don't you know it's reserved for vehicles of German origin!
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Nice one,Brian!!!


