Diagnosing washer pump failure

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
kevin316i
E30 Zone Regular
E30 Zone Regular
Posts: 783
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Feb 01, 2007 12:37 pm

When the wash-wipe function is activated, the wipers run as expected but there is no water form the jets. Checkvalve has been replaced before and there is no noise from the washer bottle area, so I'm assuming the washer pump is dead. To check, I plan on taking a voltage reading when the cycle is activated and see if there is 12V getting to the pump.
If there is 12v there, Im I correct to assume its the pump and nothing to do with the relay?
dobbie82
E30 Zone Addict
E30 Zone Addict
Posts: 4125
Joined: Thu May 05, 2005 11:00 pm
Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)

Post Thu Feb 01, 2007 2:23 pm

If 12v gets to the pump then chances are its duff, if there was noise but no water i'd suggest a blocked pipe, but no noise suggests dead pump. got a couple of pumps here for a twin washer bottle if theyre any good?
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Thu Feb 01, 2007 4:15 pm

dude where abouts u based think i have a few of them little pumps :cool:
Image
Considering Selling the Cabby, looks like its gonna go
User avatar
kevin316i
E30 Zone Regular
E30 Zone Regular
Posts: 783
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Feb 01, 2007 9:31 pm

Thanks guys, but I'm based in Ireland so postage would be expensive. I bought a wiper motor from a guy breaking E30s a week ago, and I'll be out his way again this weekend, so I'll drop by to get a pump from him if he's got any.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Feb 01, 2007 9:47 pm

12V should get to the washer pump all the time the ignition switch is in posn. 1 or beyond. It works by earthing the other side of the motor.
This is done directly by the column stalk - the wiper module in the fusebox plays no part in this.
Earth the brown/black wire from the pump as a test.