Testing the AFM: voltage question...?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
tomm
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Jul 03, 2006 11:00 pm

Post Tue Jan 30, 2007 10:11 pm

From another thread, by Brian Moore:
AFM should be switched off by the throttle position switch at idle, so check out the TPS.
Correct way to check an AFM is to apply a fixed voltage, of say 5V, across pins 3 and 4 of the AFM, and monitor the voltage across pins 2 and 4 as the flap is opened.
The voltage needs to be monitored with an analogue voltmeter or preferably an oscilloscope, and should be a smooth transition with no spikes.
Does anyone know by what amount, and over what range, the AFM should alter the voltage? I'm trying to test my AFM (doing the best I can with a digital multimeter) but there seems little difference between fully closed and fully open (assuming I'm going it right: the AFM is the usual way up, and I'm guessing that pins 1-4 run left to right)

Thanks :)
User avatar
tomm
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Jul 03, 2006 11:00 pm

Post Tue Jan 30, 2007 10:22 pm

Solved my own problem: when you number the pins 4-1 left-right, it works as expected: ~.5 volts fully closed, to full voltage fully open. It looked smooth-ish, so hopefully the AFM is OK.

One thing though - where is the screw that controls the idle mix?
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Tue Jan 30, 2007 10:24 pm

Underneath a 'tamper-proof' plug, on the top aluminium part of the AFM. Use an Allen-key to turn it.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
User avatar
tomm
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Jul 03, 2006 11:00 pm

Post Tue Jan 30, 2007 11:11 pm

Here, by any chance, where there isn't one?
Image
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Tue Jan 30, 2007 11:43 pm

That's it.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
benjy
E30 Zone Regular
E30 Zone Regular
Posts: 662
Joined: Mon Jan 02, 2006 11:00 pm
Location: English Riviera

Post Wed Jan 31, 2007 12:42 am

From what ive read on the zone, unless your hooked upto an exhaust gas analizer, you can bugger things up real fast playin with that...........HTH :wink:
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
User avatar
tomm
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Jul 03, 2006 11:00 pm

Post Wed Jan 31, 2007 11:11 am

I've never touched it, mate - that's how it was when I got the car :?

So... what am I best to do for now, as there's no screw whatsoever? Just bung it up with something?
User avatar
k
E30 Zone Newbie
E30 Zone Newbie
Posts: 103
Joined: Sun Sep 17, 2006 11:00 pm
Location: cumbria

Post Wed Jan 31, 2007 4:01 pm

Would investate why no screw down the hole.......as in my experience the idle mixture influences tickover stability and general smooth acceleration up the range, and you only touch it when you have the gas analyser hooked up, any twiddling in its past and your mixture could be anywhere leading to allsorts of perceived problems........see the long thread in this section ref juddering and its causes.
User avatar
tomm
E30 Zone Newbie
E30 Zone Newbie
Posts: 43
Joined: Mon Jul 03, 2006 11:00 pm

Post Wed Jan 31, 2007 11:21 pm

I agree that it will need setting up properly to idle properly, but once going, will such a little hole really make a difference when you've got a whacking great big one through the middle of the AFM?
User avatar
k
E30 Zone Newbie
E30 Zone Newbie
Posts: 103
Joined: Sun Sep 17, 2006 11:00 pm
Location: cumbria

Post Thu Feb 01, 2007 8:31 am

Agree it won't stop your car running, but if you have an unstable tickover and jerkiness as you go from no throttle to part throttle then get this bit sorted before you start tearing the engine management to pieces.