brake warning light on and sometimes off!!

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Mon Jan 29, 2007 4:40 pm

hi there does anyone know of a cure for the dash brake pad warning light coming on and off?

it will; sometimes come on after a bump in the road...may stay on may go off.

sometimes if you touch the clocks display it will bring it on or turn it off if it is on.

all sensors checked and replaced and pads all new.

has done it ever since i bought the car a year ago?

any help gratefully recieved
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Jan 29, 2007 4:45 pm

sounds like a dodge connection under the handbrake boot haver a look at the connection :cool:
Image
Considering Selling the Cabby, looks like its gonna go
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 4:49 pm

If you mean the pad-wear warning light, it's the cluster that'll need attention- take it out and tighten your nuts on the back... I'll search for the thread where there's a picture - hang on.

Neil; what were you thinking of? :mad:
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Jan 29, 2007 4:50 pm

Sh8t i was thinkign of the hand brake light :mad:
Image
Considering Selling the Cabby, looks like its gonna go
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 4:51 pm

User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Mon Jan 29, 2007 5:19 pm

cheers guys...seems like these nuts always need attention!!!
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Mon Jan 29, 2007 5:36 pm

The nuts are only going to give intermittent fuel and/or temp gauges. They have nothing to do with the brake pad warning lamp.

It's the 220ohm resistor that's your problem (details in the article).

Ian.
If it aint broke - Modify it...
User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Tue Jan 30, 2007 1:33 pm

cheers ian..i occasionally get a jumpy temp gauge so i'll do the nuts as well...be nice to stop that bloody red light coming on all the time
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Tue Jan 30, 2007 1:55 pm

:o: apologies - I knew the answer was in that thread, but I should have read it properly :mad:
DaveD
E30Zone Wiki Specialist
Posts: 5129
Joined: Tue Jan 11, 2005 11:00 pm
Location: Sheffield

Post Tue Jan 30, 2007 2:44 pm

Have you looked at the REAR pads and sensor...it was this on mine
Padzer
E30 Zone Newbie
E30 Zone Newbie
Posts: 25
Joined: Wed Jan 03, 2007 11:00 pm
Location: Drogheda, Ireland

Post Wed Jan 31, 2007 10:08 am

Hi, Sounds like the sensor to me. I had the same problem and then it went completely and red light is on all t he time. Discovered the sensor had come loose on the rear. Haven't had it fixed yet but have regular services so it doesn't present a real problem.
User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Wed Jan 31, 2007 3:59 pm

checked all connec tions etc..and seems strange that it can be illuminated by pressing the rev counter display..must be the display needs re-soldering
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jan 31, 2007 11:37 pm

eltel wrote:..and seems strange that it can be illuminated by pressing the rev counter display..must be the display needs re-soldering
Not at all strange, since the offending cracked joints on the resistor are on the instruments PCB.