Diff ratios...

Need technical Q/A then you're in the right place

Moderator: martauto

Stifla
E30 Zone Regular
E30 Zone Regular
Posts: 324
Joined: Sun Jun 26, 2005 11:00 pm
Location: The best part of the UK...The South!

Post Tue Jan 30, 2007 12:12 am

Hi all,
Bit of a query, ive been trying to find a bit of info.
Just got my hands on a d-reg pre-facelift 325i, and although i know they are nippy as standard, id like to improve the acceleration a bit.

I thought about changing the diff or gearbox?

Im not worried about top speed as i dont do many motorway miles.
Im assuming that the standard diff ratios are going to be something like 3.6 or 3.9?

What about 318's or 316's, what ratio are the diffs and are they man enough for the job?

8)
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Tue Jan 30, 2007 3:37 pm

The d-reg 325i should have a 3.64 diff as standard, the later plastic bumper 325i has a 3.91 diff. Changing to a 3.91 ratio will give better acceleration.

Avoid any diff from a 316i/318i/318iS/320i as they use the small case diff and are known to be weaker than the 323i/325i/M3 medium case diffs.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
User avatar
e3ONate
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Mon Jan 22, 2007 11:00 pm
Location: Brisbane, Aus

Post Thu Feb 01, 2007 7:58 am

I had a small case 3.9 diff from a 318 in my 325i for a few months, held up ok, only problem was the open centre.

I currently have a 3.6 diff which i have welded up from a 83 318i is seems to be the goods with no signs of letting go yet. busted a CV with in a week of having it in though :|

So they should be capable of the standard 325i power, but i would only use the smaller case diffs as a temp solution.
Also recomend getting a lsd :twisted: