cab suspension
Moderator: martauto
-
seanboy
- E30 Zone Regular

- Posts: 642
- Joined: Mon Aug 21, 2006 11:00 pm
- Location: Beckenham
I bought my 325 cab which was already lowered. Thought it sat to low at the back. Want to change the springs? Someone was telling me if they put lowered coupe springs in A cab it will sit lower than it should be because off the extra weight in chassis and hood?
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Thats right.
-40mm coupe springs is around -50/60mm on a cab.
-40mm coupe springs is around -50/60mm on a cab.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
seanboy
- E30 Zone Regular

- Posts: 642
- Joined: Mon Aug 21, 2006 11:00 pm
- Location: Beckenham
My cab is proper low at the moment. measured the height in the bmw manual to what it is now and got A 80mm difference. Is this the right way of measuring height differnce?
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
I think most people measure from the centre of the wheel arch to the ground.
But BMW spec is 1380mm from the floor to the apex of roof.....
But BMW spec is 1380mm from the floor to the apex of roof.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


