turbocharged 325i
Moderator: martauto
-
glenndoll
- E30 Zone Newbie

- Posts: 1
- Joined: Sun Jan 28, 2007 11:00 pm
hi. can anyone tell me what size pistons i will need to gain the low commpression to run a turbo on the m20 engine, can i use the standard crank and do the 318is pistons work.
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
If you've the later spec engine you've already got an 8.8:1 compression which is plenty low enough for lots of booooost 
Welcome to the Zone by the way
Welcome to the Zone by the way
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
dont most of the turbo'd m20 zoners run on standard compression anyway?how big boost can you run on standard compression?
oh and welcome also mate
oh and welcome also mate
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
Yeah, pretty much all of us do as far as I know. I'm higher than most as mine's the early engine, but it's still only 9.7:1
Soon to be remedied though as I'm gonna ask for 8:1 pistons when I make my evil-twin
Soon to be remedied though as I'm gonna ask for 8:1 pistons when I make my evil-twin
-
Robin_xr4i
- E30 Zone Newbie

- Posts: 21
- Joined: Sat Jan 27, 2007 11:00 pm
- Location: Torbay
Depending how much meat the pistons have on them, can't the original pistons be machined down to lower compression?
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
They probably can be, but the crowns are a funny shape so it'd be a pain in the bum IMO.
-
basil
- E30 Zone Newbie

- Posts: 65
- Joined: Sat Jun 18, 2005 11:00 pm
im running standard internals on an early engine its no probs as long as you dont run to much boost
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
there is a 9 sec m20 e30 running original pistons, about 600 hp
