fitting mtech spolier!!!
Moderator: martauto
-
Yeti
- Old Skooler

- Posts: 273
- Joined: Wed Oct 11, 2006 11:00 pm
i got a original m-tech spoiler of ebay,
im not to sure to go about fitting it,
there is half a bracket one side and the other side is missing which a think clamp to the boot,
how do i know where to put holes so the spoiler looks straight,(the bolts on the lower spoiler)
is there kit or sumthing the will help me get it set right.
cheers
im not to sure to go about fitting it,
there is half a bracket one side and the other side is missing which a think clamp to the boot,
how do i know where to put holes so the spoiler looks straight,(the bolts on the lower spoiler)
is there kit or sumthing the will help me get it set right.
cheers
-
suzie650
- E30 Zone Regular

- Posts: 460
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: CH
http://www.e30zone.net/modules.php?name ... chmtec.htm
Here you go, mate. With a big thank to mrlee!
Edit: I should go to bed at night... would avoid idiotic posts like that... sorry.
Here you go, mate. With a big thank to mrlee!
Edit: I should go to bed at night... would avoid idiotic posts like that... sorry.
Last edited by suzie650 on Sat Jan 27, 2007 6:49 pm, edited 1 time in total.
-
jokipea
- E30 Zone Newbie

- Posts: 84
- Joined: Tue May 31, 2005 11:00 pm
- Location: 5 miles from Knockhill as the crow flies
I think he's looking for info on fitting an M-Tech 2 BOOT spoiler. I got the fitting kit which was 2 plastic brackets which fit on ends of spoiler clamping it to boot-lid. Plastic nuts are used (6 required) to fit bottom part of spoiler to boot-lid. I obtained the brackets and nuts from dealer. Have no dimensions for holes as boot-lid had smaller spoiler, and holes are in same place.
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
-
sam325is
- E30 Zone Addict

- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
could try a dealership for a template...thats what they used in the factory.
they do make them, its just getting a parts guy who is good enough at searching the parts system to find it.
they do make them, its just getting a parts guy who is good enough at searching the parts system to find it.
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
I made a template a few months ago for anotjher zoner to fit one,could try PMing him to see if he still got it!
His name is Samr
His name is Samr

-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
do you think he would mind? im going to try the dealers tommorrow
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Well i didnt mind too much making it so dont see why not!noney82 wrote:do you think he would mind? im going to try the dealers tommorrow

-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
oh yes it does!noney82 wrote:it doesnt list spoiler parts on
http://www.realoem.com/bmw/select.do?vi ... E30&arch=0
http://www.realoem.com/bmw/showparts.do ... g=41&fg=60

I'm not sure what spoiler you have got, lip spoiler, or mtech 1 or 2. The mtech spoilers should be fitted with upgraded torsion springs on the boot lid. Otherwise the additional weight of the spoiler stops the boot lid staying open properly. You can get away without the stronger springs, but just be warned the bootlid slams shut very easily with the extra weight...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
i put tipex on the bolt heads and used them a s a guide when i fitted a boot spolier a while back 

Considering Selling the Cabby, looks like its gonna go
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
i couldnt find that mark, iv got the spolier in the pic your showing, i got it off a mate but he just had his boot lid drilled and then nuts and bolts
-
k
- E30 Zone Newbie

- Posts: 103
- Joined: Sun Sep 17, 2006 11:00 pm
- Location: cumbria
This is what you want


-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
k can you email that to me please nonny82@hotmail.com cheers
-
thebigone
- E30 Zone Regular

- Posts: 294
- Joined: Sat Jul 29, 2006 11:00 pm
- Location: Newhaven (south coast)
That works first class. used it last month spot on. I put masking tape on the are's that the holes are to go, and as thay all say measure loads of times and drill once. One word of worning the two sets of end nuts will break the plastic end caps if you give them to much grunt.
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
thank you for that K
