320i Touring 1989 G

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
adamski
E30 Zone Newbie
E30 Zone Newbie
Posts: 1
Joined: Tue Jan 16, 2007 11:00 pm

Post Sun Jan 28, 2007 8:16 pm

Alright Boys,

Recently joined the site because at 30 years old I have just bought my first BMW.
The car i bought is 320i Touring in 'Royal Blue' I beleive its called, the cars in good nick for its age and i bought it so that it could live the rest of its life being looked after. The cars got almost 150k on the clock but the engine has been rebuilt and all the running gear, suspension bushes etc. have been replaced. Its got TSW Stealths on an unknown sports exhaust system and uprated suspension on it and i paid £500 nicker for it with 12 months MOT.
I put it through a service, changed the timing belt and put some pads on the back. The seats were a bit tatty so i went to the local breakers and found some mint seats for £30.

I'll post some pics asap but the cars sound with minimal surface rust (looks well).

I have though a few questions you lot might be able to help with:

1) central locking is broke, Whats the likey cause of this? I have a solenoid and barrel secure clamp thing (what a pain to get off never mind get on)

2)Car seems a bit flat in places and first gear seemsreally short is this normal?

3) Is there anything i can do make it run a bit more economically? I wasn't expexting it to be great bu i think its worse than it should be.

4)Can anyone point me in the direction of a load cover (really doing me head in not having that)

5)Rear washer wiper not working and ideas what normally is the cause of this?

6) Passenger side headlamp wiper not working also (new motor?)

7) Anyone wanna trade the TSW's for BBS 15"'s?

8.) head lining sag in the rear has anyone else sorted this before if so how?

Quite a few questions i know and any helps much appreciated the car and I are in Carlisle by the way and its driven everday at the Mo : )

Cheers Adam :D
Chris
E30 Zone Camper
E30 Zone Camper
Posts: 1093
Joined: Thu Apr 07, 2005 11:00 pm
Location: Clacton, Essex

Post Sun Jan 28, 2007 10:12 pm

Welcome to the forum Adam, you've got yourself a nice car and its good to hear more people buying them to look after them :D

1) Do a search for 'black red wire' and 'brianmooore' that usually does the trick and involves cutting a wire a rejoining differently.

2) First is a little short due to the gearing that comes with the touring body style (extra weight etc) but what numbers are you gettting? It may have had a funny diff put in when the running gear was given the once over.

3) Less right foot, convert to LPG :D The 320i is renowned for being a bit thirsty. Especially with the added weight of the tourer, but just general maintenance is always helpfull

4) Ebay, or maybe someone on here??

5) Cant comment i'm affraid.

6) The motor shafts on the headlight wipers seize after about 17 years, but you can take them apart give em a clean and a grease up and they'll be as good as new. There is a write up about it in the articles section i think, if not do a search it has been covered before, with lots of info and pictures.

7) Wouldnt swap my BBS's for anything winkeye much

8) Drawing pins, quite stylish really. Good things have been done with hairdryers, spray on adhesive and even PVA. The headlining can be taken down and recovered if you have the time and patience, u can also buy a new one but they are quite pricey.

Hope some of that helps.

Cheers
Chris
Image
stonesie
E30 Zone Addict
E30 Zone Addict
Posts: 3277
Joined: Sat Jan 07, 2006 11:00 pm
Location: Doncaster

Post Sun Jan 28, 2007 10:20 pm

On 2)

My 320 was also flat below 4k then you get the surge, i think thats just how the 2.0 engines are :)
jcjdavis1
E30 Zone Camper
E30 Zone Camper
Posts: 1128
Joined: Thu Apr 13, 2006 11:00 pm
Location: Paisley Scotland

Post Sun Jan 28, 2007 10:27 pm

Hi and welcome. Just got a 320i auto touring myself same colour different probs.Headlight wipermotor,some for sale at the moment in the for sale section easier option than trying to free spindle.
Image