OBC

Need technical Q/A then you're in the right place

Moderator: martauto

bigpimpin
E30 Zone Regular
E30 Zone Regular
Posts: 691
Joined: Sun Jan 16, 2005 11:00 pm
Location: Aberdeenshire

Post Sun Jan 28, 2007 5:17 pm

Hi, just spent the afternoon removing the OBC from a touring. Got everything out but now the car wont start :roll:

Now I think I've seen something regarding an immobiliser function but dont know whether I've disconnected something I shouldnt have. I remember a connector behind the glovebox with a green and green/red wire.

Any ideas? :cry:
Image
www.m3touring.com
E38 740is, E36 325i Touring, P38 Vogue 4.6[
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jan 28, 2007 6:30 pm

White two pin connector with two green wires, coming from the loom above the middle of the glove box. Needs to be fitted with a plug that has a short loop of wire between the two pins.
If the OBC was OE, there should be such a plug tied up to the loom nearby.
bigpimpin
E30 Zone Regular
E30 Zone Regular
Posts: 691
Joined: Sun Jan 16, 2005 11:00 pm
Location: Aberdeenshire

Post Sun Jan 28, 2007 7:38 pm

Genius! so I can solder those 2 wires together, Cheers! :cool:
Image
www.m3touring.com
E38 740is, E36 325i Touring, P38 Vogue 4.6[