HELP IM STUCK!! retro fitting OBC

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
e30-unit-soldier
E30 Zone Regular
E30 Zone Regular
Posts: 551
Joined: Thu Nov 24, 2005 11:00 pm
Location: Bristol

Post Sat Jan 27, 2007 5:06 pm

Just started to fit a obc in my 1990 320i cab. :D
removed the clock,dash ecu etc and were the obc brain goes theres one already there! 8O its a blue one and not black as the one i bought! :?
i traced all the wiring and its all wired up including the bonnet switch obc horn and outside temp probe! the green plug that goes in the back of the obc is also plugged inthe blue unit and there is also a round plug with a grey wire that runs behind the speaker on the drivers footwell whats that for? :roll: cant find the yellow plug that goes in the back of the dash and also the one that connects to the indicator stalk! :(

Dont know what to do shall i jus remove all the wiring and rewire the loom that i removed from donor car or what? :cry:
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Jan 27, 2007 5:36 pm

what you call the OBC brain is not - it is just 2 relays to do with the immobiliser function. I'm suprised there is a temp sensor, but hey....

Put the OBC into the dash, the indicator onto the column, with that section of the loom with the yellow plug going to the yellow connector on your cluster. Then see if it works, and the car still starts. The OBC gets it's power and most of it's data from the yellow connection into the cluster

Then I guess you will have to swop connections over until the gong (over your right knee), and the temp sensor (connected behind the glove-box) start to work.
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Jan 27, 2007 5:40 pm

sorry I'm assuming you HAVE a new loom with a yellow plug at one end?
User avatar
e30-unit-soldier
E30 Zone Regular
E30 Zone Regular
Posts: 551
Joined: Thu Nov 24, 2005 11:00 pm
Location: Bristol

Post Sat Jan 27, 2007 8:33 pm

orangecurry wrote:sorry I'm assuming you HAVE a new loom with a yellow plug at one end?
Yep i do but its all taped together if you know what i mean.
so whats the blue box then?

Am i gonna have to remove the blue box completeley?
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Jan 27, 2007 9:38 pm

have a look at the pictures in the other OBC thread - see if you can work out what's what from that.

The blue box with the relays acts as an immobiliser; as far as I can make out, it stops the petrol pump if the CODE function on the OBC is set and the wrong code gets entered at start-up.
If you have no interest in that function, then just ignore those connections on your new loom, and leave the old box and loom alone, otherwise your car might not start.

I'm sure that's what I did when I retrofitted my OBC. Probably :mad:
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Jan 27, 2007 9:40 pm

sorry (again) I should have said I believe you have the relay box in your cab already as it is part of the magnetic key immobiliser which only cabs had fitted at the factory....

I have a cab as well.

is this getting clearer or not? :mad:
User avatar
e30-unit-soldier
E30 Zone Regular
E30 Zone Regular
Posts: 551
Joined: Thu Nov 24, 2005 11:00 pm
Location: Bristol

Post Mon Jan 29, 2007 5:26 pm

orangecurry wrote:sorry (again) I should have said I believe you have the relay box in your cab already as it is part of the magnetic key immobiliser which only cabs had fitted at the factory....

I have a cab as well.

is this getting clearer or not? :mad:
I spoke to a few other guys and the blue box on the cabby's are to do with the second key lock thingy next to the door lock on the drivers door! :?

I thought that was just a 'deadlock system' turns out that when you dead lock the car it gets immobilised same way the obc would immobilise it,and it also acts as a alarm cause theres a second horn there aswel and a bonnet switch which the donor car didnt have. :?

what ive been told is to disconnect the blue box as i dont have a key for the deadlock anyway and replace it with the black one i got with my obc. :mad:

The only thing im pleased about is that i dont have to go through the hassle of wiring in the loom under the bonnet. winkeye