Shock Removal from Leg
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Guys
Im trying to remove the shock cartridge from the leg but i cant get a grip on the collar any idea's or tricks to releasing the shock cartridge??
Thanks
Neil
Im trying to remove the shock cartridge from the leg but i cant get a grip on the collar any idea's or tricks to releasing the shock cartridge??
Thanks
Neil

Considering Selling the Cabby, looks like its gonna go
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
You really need a stilson grip/pipe wrench to do the job.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Yep, stilsons are the tool.
If your replacing with new collars you could use a hammer and chisel, but you dont want to go tightening them up that way
If your replacing with new collars you could use a hammer and chisel, but you dont want to go tightening them up that way
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Cheers guys, im going back out to the garage now for another try,
Dan i have got new collars aswell mate, so tighten thrm up with hammer and chisel??
Dan i have got new collars aswell mate, so tighten thrm up with hammer and chisel??

Considering Selling the Cabby, looks like its gonna go
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
Id tighten them up with stiltsons!cliffybabe wrote:Cheers guys, im going back out to the garage now for another try,
Dan i have got new collars aswell mate, so tighten thrm up with hammer and chisel??
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I meant you can remove them with a hammer and chisel, I wouldnt tighten them back up like it though because they will be in a right state! 
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Hope that these are chrome fittings.... 
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
He wouldn't put a chisel near chrome.... maybe a wetwipe ;)
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i had to seek help from my friendly local kwik fit to give them a blast from the gas torch as mine were rusted solid
and wouldnt budge even with the stilsons and a vice
and wouldnt budge even with the stilsons and a vice
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
Use a grinder and cut a bigger groove into the collar, apply a lot of heat, and then a chisel and a big hammer, that should sort them!

-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Alternatively, bolt the hub back into one of your wheels with the four wheelbolts; lie the wheel face down and it will be much easier to grip the leg; then use stilsons to undo the nut and plenty of wd40; i told you at lakeside it would be a cunt!
reference to the chibster for the tip
reference to the chibster for the tip
Last edited by Dan318-is on Sat Jan 27, 2007 8:34 pm, edited 1 time in total.
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Yeah thanks for the reference, to my idea!Dan318-is wrote:Alternatively, bolt the hub back into one of your wheels with the four wheelbolts; lie the wheel face down and it will be much easier to grip the leg; then use stilsons to undo the nut and plenty of wd40; i told you at lakeside it would be a ****!
Andrew
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Andrew he watched me do it!
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
didn't no it was a world renowned secret to be honset?Demlotcrew wrote:Yeah thanks for the reference, to my idea!Dan318-is wrote:Alternatively, bolt the hub back into one of your wheels with the four wheelbolts; lie the wheel face down and it will be much easier to grip the leg; then use stilsons to undo the nut and plenty of wd40; i told you at lakeside it would be a ****!
Andrew
trueSimon13 wrote:Andrew he watched me do it!
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
I'm sure people thought of that way way before you did

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
all done guys, shocks are in and new cab springs are on the front, Im quit epleased with myself as i have done it all on my own.
Whilst i was at it i also fitted new top mounts as mine had some play.
Thanks for all the help with the removal side of things, I ended up putting them in a vice and using some huge stilsons which i borrowed of a gas fitter
Tomorrow ill put the rear springs in and stick up some pic's
Thanks again
Neil
Whilst i was at it i also fitted new top mounts as mine had some play.
Thanks for all the help with the removal side of things, I ended up putting them in a vice and using some huge stilsons which i borrowed of a gas fitter
Tomorrow ill put the rear springs in and stick up some pic's
Thanks again
Neil
Last edited by cliffybabe on Sat Jan 27, 2007 8:37 pm, edited 1 time in total.

Considering Selling the Cabby, looks like its gonna go
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
good work you chrome fiend
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
When you can word together a sentence, then I might listen to what you have to say.maxfield wrote:I'm sure people thought of that way way before you did
Andrew
-
Dan318-is
- Married to the E30 Zone

- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Andrew, credited above

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Demlotcrew wrote:When you can word together a sentence, then I might listen to what you have to say.maxfield wrote:I'm sure people thought of that way way before you did
Andrew

Considering Selling the Cabby, looks like its gonna go
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
See Stu i told u im a good watcher, Na all jokes aside well pleased and i hve lowered the rear aswel 
And Si i think u were right the springs were saloon springs first time round
And Si i think u were right the springs were saloon springs first time round

Considering Selling the Cabby, looks like its gonna go
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Chrome springs?
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
na red but the bolts from taylor are now on and there shinydaimlerman wrote:Chrome springs?

Considering Selling the Cabby, looks like its gonna go
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Is red the new chrome?Bet they look smart,well done!!
-
ric325i
- E30 Zone Squatter

- Posts: 1961
- Joined: Tue Apr 04, 2006 11:00 pm
- Location: Gateshead
yeap the red wont last long. they get dirty!
i know your pain in changing suspension! had same issues and discovered a big saw (on the collar) then a hammer and screw driver to take off!
very destructive......i liked it!
but the issues cam when re-attaching the collar! i didnt tighten the up properly...
the collar came loose and popped of and the leg wobbled around very strangely!
so it was back to the spring compressors and start again
i know your pain in changing suspension! had same issues and discovered a big saw (on the collar) then a hammer and screw driver to take off!
very destructive......i liked it!
but the issues cam when re-attaching the collar! i didnt tighten the up properly...
so it was back to the spring compressors and start again

-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
another tip is to refit the strut to the car minus the spring.Bolt one or all 3 strut top bolts up and pop it back on to the ball joint and steering joint and then its held in place,then use stilsons on the nut to undo it.


