zone chip

Need technical Q/A then you're in the right place

Moderator: martauto

he30
E30 Zone Regular
E30 Zone Regular
Posts: 978
Joined: Tue Oct 31, 2006 11:00 pm
Location: west yorkshire

Post Sat Jan 27, 2007 3:18 pm

I'm in the process of fitting my zone chip but the legs on the chip are too wide to fit in its place. How can you bend them to fit as you can't touch them?

Help,

Howard :x
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Jan 27, 2007 3:22 pm

Bend them against an (ideally) earthed metal plate - gently push the chip evenly one each side 'til the pins are the correct width apart.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Jan 27, 2007 3:23 pm

It's possible to do this without touching the pins! You can ground yourself too, against say a water pipe, to avoid static.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
he30
E30 Zone Regular
E30 Zone Regular
Posts: 978
Joined: Tue Oct 31, 2006 11:00 pm
Location: west yorkshire

Post Sat Jan 27, 2007 3:30 pm

Thanks guys :D
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Jan 27, 2007 3:34 pm

That's OK, we're identical twins y'know :wink:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jan 27, 2007 6:04 pm

Put the pins in at one side,then use a credit(or debit,it dosent matter)card to push the pins over until they engage.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sun Jan 28, 2007 9:44 pm

There may a risk of static damage from whipping the plastic card out of your wallet :!:
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
m-dtech
Unapproved Trader caution
Posts: 2068
Joined: Thu Sep 01, 2005 11:00 pm

Post Sun Jan 28, 2007 10:11 pm

trick is not to over handle chips, but dont be too concerned about static.

i have done lots of testing on lots of chips on static damage and unless your rubbing a baloon or rubbing your nylon trousers franticly winkeye then you will be ok !!
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sun Jan 28, 2007 10:46 pm

Do you work in the electronics industry, m-dtech?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Jan 29, 2007 5:27 am

I always remove my cards slowly and with great care....or you could call me a tight git!!
User avatar
eltel
E30 Zone Regular
E30 Zone Regular
Posts: 654
Joined: Wed Nov 09, 2005 11:00 pm
Location: mid wales

Post Mon Jan 29, 2007 4:34 pm

when you buy the chip..the advice enclosed is to use a credit card or alike...well that what mine says anyway
Only in the good lord we trust.. In everything else we check!!


1988 325i Tourer, Lowered, Deep Dish Alloys, Obc, Cruise Control, Heated Leather Sport Seats....
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Mon Jan 29, 2007 4:37 pm

"ease the pins in with the edge of a Credit Card, or similar"

no problem with this , I wrote the instruction LOL !
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW