differential

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
mrgtsx
E30 Zone Newbie
E30 Zone Newbie
Posts: 82
Joined: Mon Nov 06, 2006 11:00 pm

Post Wed Jan 24, 2007 6:58 am

ok guys turbo conversion is underway now im in hunt for a diff. i doubt the stock 320 will hold so i need one that is abit stronger. what do you guys suggets ive heard alot of good words about the 5 series diff
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Jan 24, 2007 9:20 am

The only diffs that will fit straight into an E30 are the small case (that you already have) and the medium case from the 325.
The medium case diff is very strong, but only you know what sort of torque and power you intend to put through it.
The large case diff is extremely strong and can be fitted with appropriate mods to the rear beam.
User avatar
mrgtsx
E30 Zone Newbie
E30 Zone Newbie
Posts: 82
Joined: Mon Nov 06, 2006 11:00 pm

Post Thu Jan 25, 2007 7:09 am

so my best bet is a 325 diff. well it wont be going over 200rwkw and torque wise not 100% sure on it thanks
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Jan 25, 2007 8:51 am

There are diffs from other BMWs with the same medium case internals, some of which can be fitted with enough fabrication.
Diffs from some smaller engined E28s are medium case, and fit E30s with a change of rear cover and output flanges. Diffs from E36 compacts and Z3s are fitable as well.