Smoothing out side mouldings
Moderator: martauto
-
e30mclow
- E30 Zone Newbie

- Posts: 123
- Joined: Tue Oct 17, 2006 11:00 pm
- Location: Now in the USA
While getting my car ready for spraying over the weekend I removed the side mouldings, I was originally going to de-chrome these and refit but the car looked really nice without them. I am going the euro route so I recon this would look nice. But before I go ahead has anybody got any nice pics of something euro look without the side mouldings?
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
I'd like to see some pics too!!!!!
Have considered it, but was very unsure!!!
Do it!!!!!!!
Have considered it, but was very unsure!!!
Do it!!!!!!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
e30mclow
- E30 Zone Newbie

- Posts: 123
- Joined: Tue Oct 17, 2006 11:00 pm
- Location: Now in the USA
Ah but you see there is no going back, plus they are actually handy! They are perfectly placed for protecting the doors if opened on a wall for instance. But without your gonna end up dented.... As said before if anybody has ANY pics at all it would be appreciated
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
I can't decide whether to go all smooth, or wether to fit a tec-2 kit on it!!!!!!!
Was thinking the other night about removing the locks and handles (dunno how the rear doors will open though!!) and possibly more stuff!!
Not sure if it'll look odd without the side moulding though, 'cos it lines up with the front and rear bumpers. Don't think they could really be smoothed in very well!!
Someone must be able to photoshop the side mouldings off?!?!?
I tried, but i'm crap!!
Was thinking the other night about removing the locks and handles (dunno how the rear doors will open though!!) and possibly more stuff!!
Not sure if it'll look odd without the side moulding though, 'cos it lines up with the front and rear bumpers. Don't think they could really be smoothed in very well!!
Someone must be able to photoshop the side mouldings off?!?!?
I tried, but i'm crap!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
J_Mac
- E30 Zone Regular

- Posts: 401
- Joined: Thu Nov 02, 2006 11:00 pm
i was thinking a smooth e30, locks, handles, sidemouldings and even the mirrors look ok (seen it before somewhere) altho there very use-full, i'll do a photoshop of mine, with that lot done

-
J_Mac
- E30 Zone Regular

- Posts: 401
- Joined: Thu Nov 02, 2006 11:00 pm
Look abit wierd, don't think i like the no mirror thing, looks abit gay



as for the side mouldings, does it work?



as for the side mouldings, does it work?

-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
Can't decide if i like it or not - looks quite good i think, (apart from the mirors!), but it'd depend on what other mods you have. Would have to be a bit carefull with it me thinks!!
I'm still undecided wether to put on the full tec-2 kit, or go all smooth!!!!!!!!!
I just don't know!!!!!!!!!!
I'm still undecided wether to put on the full tec-2 kit, or go all smooth!!!!!!!!!
I just don't know!!!!!!!!!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
When ya remove the side mouldings, is there a little 'channel' there that it sits in then?? Like the one in the last pic. Looks quite cool without that filled in!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
e30mclow
- E30 Zone Newbie

- Posts: 123
- Joined: Tue Oct 17, 2006 11:00 pm
- Location: Now in the USA
Are pre facelift doors different?? I have the channel like the last pic not the first. I think I'll leave it, I can always do it later. It looks great when going for the euro look but Im nervous cuz if I think it looks sh1t I'm stuck with it
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
All doors apart from the m3 have the channels.
-
jbee
- E30 Zone Newbie

- Posts: 223
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Hengoed, south wales
took the mouldings off my old car, used filler to fill the grooves



-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
jbee, looks cool on that one!!!! 
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>


