Hi guys,
I'm petty new to the zone and having read loads of other peoples problems have decided to throw one of mine into the ring for your expert attention.
When I bought my cab in the summer I wasn't nieve enough to believe that the old girl would be perfect. There are quite a few things to fiddle with and get sorted. First project is to get the electric roof functioning as it should.However whilst I get get motor sorted out and following the 3 months solid of rain, I've got to get a leak sorted 1st. I'm feed up of getting soaked when getting into the car. It doesn't appear to leak when it's parked up!!
My problem is that water pours in from the top of the drivers door when you open the door to get in. The seal appears to be slightly split, which I think might be the problem.
Has anyone changed this top seal and was it difficult??
leaky 325i cab
Moderator: martauto
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I think the seal you mean is the main front seal - goes over one front window, then along the front screen/roof, then the last section goes over the other front window - is essentially C-shaped.
Changing this top seal is not difficult, but it takes time as you have to 'thread' the new one into the grooved channels in the hood frame. Use some silicone grease to ease this process, and keep it greased to keep it supple and waterproof.
I bought an O/E BMW one from www.motormec.co.uk for around 60 GBP IIRC.
ps it's naive not nieve
Changing this top seal is not difficult, but it takes time as you have to 'thread' the new one into the grooved channels in the hood frame. Use some silicone grease to ease this process, and keep it greased to keep it supple and waterproof.
I bought an O/E BMW one from www.motormec.co.uk for around 60 GBP IIRC.
ps it's naive not nieve
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
now i thought i was the only one that was picky!!! lolorangecurry wrote: ps it's naive not nieve
you are going to have your work cut out with the spelling(lack of) on the zone....anyway I thought you were skiing this week...I hope you have more snow than there is here(Bulgaria)...
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I was skiing - I'm back! It was a three-day madness special, for a friends birthday... no time for good photos, but you can see the slopes/snow on these... the 2nd one the Birthday boy was just about to pull a double jump.... but crashed horribly


-
jack148
- E30 Zone Newbie

- Posts: 195
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: South wales
Thanks for the replys fellas.
From your thoughts am I right to believe that the seal that sits on top of the drivers and passenger windows are part of a complete seal that goes right across the whole front of the roof?? I hag afeeling this wasn't going to be cheap & straight forward.
Hey orange man thats the way we spell down here in Wales, isn't it butt! Lol!!
From your thoughts am I right to believe that the seal that sits on top of the drivers and passenger windows are part of a complete seal that goes right across the whole front of the roof?? I hag afeeling this wasn't going to be cheap & straight forward.
Hey orange man thats the way we spell down here in Wales, isn't it butt! Lol!!
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
orange i am
with envy
jack here is the diagram
http://realoem.com/bmw/showparts.do?mod ... g=54&fg=10
the front seal is separate but try silicone grease on all the rubber parts before you spend money..it is usually the rubber hardening and shrinking a bit
jack here is the diagram
http://realoem.com/bmw/showparts.do?mod ... g=54&fg=10
the front seal is separate but try silicone grease on all the rubber parts before you spend money..it is usually the rubber hardening and shrinking a bit
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
OH yes I forgot!! check the tensioner wire that goes from front to back..this pulls the side of the canvas out and keeps the water away from the side ..the spring at the back goes sometimes
-
jack148
- E30 Zone Newbie

- Posts: 195
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: South wales
All good stuff!! isn't it!!
I have greased the seal up and am now waiting for the rain to try it out!!
Won't have to wait to long, I'm sure!!!
Tensioner wire is fine, I think. The car had a new roof fiited before I bought it. Why they didn't get seals sorted then I don't know. Seems daft to fix the roof to stop the water getting in then leave holes in the seals to let you carry on getting wet. Half a bloody job!!!!
I have greased the seal up and am now waiting for the rain to try it out!!
Won't have to wait to long, I'm sure!!!
Tensioner wire is fine, I think. The car had a new roof fiited before I bought it. Why they didn't get seals sorted then I don't know. Seems daft to fix the roof to stop the water getting in then leave holes in the seals to let you carry on getting wet. Half a bloody job!!!!
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
when i bought my new roof it came with a new seal from the manufacturers so they expect to need to fit a new one !!
hope it works
hope it works
-
jack148
- E30 Zone Newbie

- Posts: 195
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: South wales
I've got the receipt from the guys who fitted it & they are local to me, I'll be straight round there this aft to see if they still have the seal!!
Still waiting for it to rain!!!
Still waiting for it to rain!!!
-
GDBN
- E30 Zone Camper

- Posts: 1415
- Joined: Fri Apr 08, 2005 11:00 pm
- Location: Copenhagen
Most roofs that I have seen for sale don't include the front seal ... it is an extra.
G
G

I deserve 6 of the best ...
-
jack148
- E30 Zone Newbie

- Posts: 195
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: South wales
Thanks for that m8, I wont go in stamping my feet then!!

