borin out a m20 325
Moderator: martauto
-
steveyboy
- E30 Zone Newbie

- Posts: 8
- Joined: Fri Dec 08, 2006 11:00 pm
im just wonderin would it be possible to bore out a 2.5 to a 3.0, im unsure if this possible so thats why im askin,
cheers in advance for help,
cheers in advance for help,
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
i have seen 3litre stroker kits for sale on the web before. but cant help you any more than that
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Pretty sure E30Adam has done his to 2.8?
Maybe worth searching under his name or maybe even just PM him to find out!
Maybe worth searching under his name or maybe even just PM him to find out!

-
Steve
- E30 Zone Team Member

- Posts: 13158
- Joined: Sun Dec 19, 2004 11:00 pm
or Andyboy as he built it and Adam bought it off himPretty sure E30Adam has done his to 2.8?
Maybe worth searching under his name or maybe even just PM him to find out!
webmaster@e30zone.net
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Good call,didnt know that.Steve wrote:or Andyboy as he built it and Adam bought it off him

-
Steve
- E30 Zone Team Member

- Posts: 13158
- Joined: Sun Dec 19, 2004 11:00 pm
Adam's spec
Engine & Transmission: 2.8 litre M20 with modified pistons & E36 328i crank, Schrick 284\272 camshaft, Schrick dual valve springs, Dastek unichip & remap, MAF conversion, oversized throttle body, FSE adjustable [fuel pressure regulator & guage, Scorpion full stainless steel exhaust system, polyurethane engine mounts, Getrag 260/5 sports gearbox with Z3 short-shift conversion, 25% locking 3.91 ratio Limited Slip Diff

Engine & Transmission: 2.8 litre M20 with modified pistons & E36 328i crank, Schrick 284\272 camshaft, Schrick dual valve springs, Dastek unichip & remap, MAF conversion, oversized throttle body, FSE adjustable [fuel pressure regulator & guage, Scorpion full stainless steel exhaust system, polyurethane engine mounts, Getrag 260/5 sports gearbox with Z3 short-shift conversion, 25% locking 3.91 ratio Limited Slip Diff
webmaster@e30zone.net
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
You can't bore it out to 3 litres, there's not enough metal between the cylinders to do it.
You could bore it out a little but would need a longer throw crank and rods, pistons etc to get close.
Cheers,
Iain T
You could bore it out a little but would need a longer throw crank and rods, pistons etc to get close.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
steveyboy
- E30 Zone Newbie

- Posts: 8
- Joined: Fri Dec 08, 2006 11:00 pm
Templ8e30 wrote:You can't bore it out to 3 litres, there's not enough metal between the cylinders to do it.
You could bore it out a little but would need a longer throw crank and rods, pistons etc to get close.
Cheers,
Iain T
hmm that is wat i thought not enuff space in the block, does any 1 no wats the most they can be bored to ???
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
i would guess to around 85mm, maybe 86mm Max.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Nothing really, and still retain reliability. Fire rings on the gasket are nearly touching each other as it is.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the only way is a longer throw crank for extra cc really
-
E30Adam
- Married to the E30 Zone

- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
Ireland Engineering do stroker kits for 2.9, 3.0 and 3.1 litre M20's!!
https://secure19.nexternal.com/shared/S ... oducts.asp
https://secure19.nexternal.com/shared/S ... oducts.asp

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
lol
-
E30Adam
- Married to the E30 Zone

- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
What a useful piece of information to add to this thread. Did you find something funny?snoops wrote:lol

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
WillG
- E30 Zone Regular

- Posts: 433
- Joined: Wed Mar 29, 2006 11:00 pm
- Location: Cheltenham
yeah probly the price
yeah 85mm is most you can bore out to but its not worth it
-
E30Adam
- Married to the E30 Zone

- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
When you consider the exchange rate, about a grand is actually a pretty good price for what you're getting!
If you're talking about proper mods, you've got to realise it's gonna cost proper money. It's a bit different from bolting a K&N on and expecting the 10bhp gain they state on the box.
If you're talking about proper mods, you've got to realise it's gonna cost proper money. It's a bit different from bolting a K&N on and expecting the 10bhp gain they state on the box.

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
Ooh, that Ireland Engineering site's a dangerous place!
Anyone know what the stroke of their 2.9 is? Quite interested in their bit about you being able to spec any bore and CR too, and having the option for stonger rods for another $600 is pretty appealing too.
Hmmm, ignoring tax and shipping that's only £1160 for an all steel bottom end and forged pistons!
To say I'm tempted is an understatement!
Anyone know what the stroke of their 2.9 is? Quite interested in their bit about you being able to spec any bore and CR too, and having the option for stonger rods for another $600 is pretty appealing too.
Hmmm, ignoring tax and shipping that's only £1160 for an all steel bottom end and forged pistons!
To say I'm tempted is an understatement!
-
E30Adam
- Married to the E30 Zone

- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
They certainly sell some awesome stuff.
The best thing is to call and speak to Jeff. It's not too expensive to call the states but bear in mind the 5 hour time difference.
The best thing is to call and speak to Jeff. It's not too expensive to call the states but bear in mind the 5 hour time difference.

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
Just sent them an email about the bore and compression options 
God I wish I hadn't seen that site!
God I wish I hadn't seen that site!
-
steveyboy
- E30 Zone Newbie

- Posts: 8
- Joined: Fri Dec 08, 2006 11:00 pm
adam could you send me some info on your 2.8 , wat block you used , pistons crank rods etc
-
steveyboy
- E30 Zone Newbie

- Posts: 8
- Joined: Fri Dec 08, 2006 11:00 pm
that site is very good and i agree that the prices are excellent aswell,
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
The 3.1 stroker kit has an 89.6mm stroke
That's gonna be one slow revving motor.
'performance beyond a E36 M3' I think not
Cheers,
Iain T
That's gonna be one slow revving motor.
'performance beyond a E36 M3' I think not
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
Says you keep the 135mm rods for all of those kits though doesn't it?
The gudgeon pins must be miles up the pistons!
The gudgeon pins must be miles up the pistons!
-
E30Adam
- Married to the E30 Zone

- Posts: 8483
- Joined: Sun Dec 19, 2004 11:00 pm
- Location: Bournemouth
All the info's in Steve's post at the top mate. Stock M20 block and pistons were used.steveyboy wrote:adam could you send me some info on your 2.8 , wat block you used , pistons crank rods etc
For the money it costs to do this you're better off putting an M50B28 engine in, 24valves too!

2.8 Litre M20 powered - Essen Sie meinen Staub biatch
-
steveyboy
- E30 Zone Newbie

- Posts: 8
- Joined: Fri Dec 08, 2006 11:00 pm
so adam roughly what bhp is yours puttin out ??? sorry if im bein nosey lol
-
e21Jason
- E30 Zone Addict

- Posts: 2040
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Dubai, UAE
Hi
The Ireland & MM kits take the block out to 86mm and use pistion whith a taper at the top to clear the head gasket ring
Jason
The Ireland & MM kits take the block out to 86mm and use pistion whith a taper at the top to clear the head gasket ring
Jason
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
I emailed Jeff at Ireland to ask about the pistons and he said you can have them in any bore you like so if you're anal enough to have a 2 litre block bored out to 84mm (and I am), you can use bits designed for the 2.5 engine such as head gaskets and the like.
Does only give you a 2.8 if you get their 2.9 conversion though.
Does only give you a 2.8 if you get their 2.9 conversion though.
