Clutch noise

Need technical Q/A then you're in the right place

Moderator: martauto

liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Tue Sep 12, 2006 9:21 pm

Hi guys im new to the forum and have just finished putting a 325i engine into my 320i but i have a worrying noise coming from the clutch and i was hoping someone may be able to help.

When i'm slipping the clutch there is a grinding noise :cry: other than this the clutch seems to operate fine with no noise while engaged/disengaged.

The clutch is a complete brand new unit.

At first i thought it possibly just needed bedding in but have covered 25 miles and still no joy.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Tue Sep 12, 2006 9:28 pm

is it only while the clutch is slipping or when you apply pressure to the pedal?

what was the flywheel like before the clutch change?
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Tue Sep 12, 2006 9:51 pm

Its only when the clutch is slipping the flywheel was fine as far as i could tell. The operation of the clutch is fine... maybe i should just close the window and turn the stereo up.

thanks for the reply
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Wed Sep 13, 2006 6:59 pm

in that case the only things i can things of are:
1) strange clutch juddering / squealing from a damaged or faulty clutch plate
2) the ctutch plate in backwards (seems very unlikely as i doubt it would disengage at all, or even bolt up fully)
3) clutch contamination from something...

i'm fairly stumped

was a new release bearing fitted?
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Wed Sep 13, 2006 7:33 pm

yea this one is a bit of a mystery

The clutch is a fairly good sachs item so i wouldnt have thought it would be faulty but i suppose anything is possible.... i really cant be arsed to take the gearbox out.

I thoroughly cleaned everything and used the correct grade grease on the clutch splines tranny splines and on the release bearing.

Rear crankshaft oil seal was replaced and i did fit a new release bearing-although i dont think this is a symtom of a knackered release bearing.

Master cylinder and slave cylinder are both new(ish) although i dont think that would affect anything.

everything was nice and snug

The car is still declared sorn so i cant really drive it too far but i'll keep you informed.
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Mon Sep 18, 2006 9:42 pm

Decided to just leave the clutch for now get the car through the mot and see what happens :D
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Mon Sep 18, 2006 9:48 pm

the clutch won't affect the mot and it may just clear up with time.

suck it and see!
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Thu Oct 12, 2006 9:36 pm

75 miles and still singing :?
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Thu Oct 12, 2006 9:40 pm

are you near any other 'zoners?

do you have a camera with a decent video function? you could upload a video of the car making the noise for some expert opinions! try photobucket, it's well easy.
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Thu Oct 12, 2006 10:14 pm

I don't think there are many zoners in South Somerset, no.

yea that sounds like a good idea i i may try that when i get my new phone software uploaded, i'm not an expert on computers but i'll have a go, i have shown my car to a few experts but no use.

Anyway zoners are more clued up about e30 problems then any mechanic i have asked.

Thanks, Dan
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Fri Jan 12, 2007 8:40 pm

Ok i thought I'd update people on this problem of mine.

I only put my car legitimately on the road 3 weeks ago (I'm slow and i have another car to use whenever I please).

Anyway 500 miles of pleasurable driving have passed :) and the clutch is still playing a tune, but as it is not too noticeable with the windows closed i have mostly ignored it. Then a few days ago i noticed that sometimes in fourth/fifth gear at about 2500rpm upwards if i suddenly step on the gas, the clutch would slip for a second and then catch again, if i tried it again it would be fine however. This was quite random though and would not happen very often. About 100 miles have passed and now the clutch is slipping in fourth/fifth under heavyish throttle and now sometimes in third as well. If i put it in second with the handbrake on and give a little throttle while releasing the clutch pedal it will still easily stall the car still...

Can i have really burnt through a clutch in 500 miles??? :(
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 13, 2007 10:25 am

:?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Jan 13, 2007 12:10 pm

No point in speculating what it may be! It needs to come apart for inspection.
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sat Jan 13, 2007 12:20 pm

He's right - no matter how you slice it, it's coming apart.
Image
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 13, 2007 11:23 pm

Yea i've got a clutch on its way, hopefully it'll all be clear on inspection.

I'll keep you updated.

Thanks, Dan.
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 20, 2007 12:19 pm

Ok.

It was pretty obvious what a dumbass I had been when I removed the clutch for inspection.

I've just got to try and post some pictures up...

It may take me some time.. :?
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 20, 2007 12:29 pm

Image

Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Jan 20, 2007 12:44 pm

Oops!!!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jan 20, 2007 12:59 pm

You put it in backwards! :eek:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat Jan 20, 2007 1:39 pm

gareth wrote:2) the ctutch plate in backwards (seems very unlikely as i doubt it would disengage at all, or even bolt up fully)
whoops!!!! :D bloody amazing it drove! bet it was noisy though winkeye

was there any other damage? was it the flywheel bolts that ate the springs? if so, i'd replace them as you really don't want the flywheel coming off unless you want to look like Douglas Bader 8O
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 20, 2007 2:01 pm

Yep you were right gareth, I put the clutch disc in backwards so the springs were rubbing on the flywheel bolt heads,although the bolt heads were hardly damaged so didnt need replacing.

Yea it was noisy not to bad inside the car though, I guess I should have been more carefull putting the clutch on all those months ago, although there were no markings on the clutch disc showing which way round it goes it was quite obvious putting the disc against the flywheel that all would not be well.

I have put the new disc in and the car finally drives the way it should, much smoother gear changes as well.

Lesson learned.. the hard way. :wink:
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sat Jan 20, 2007 3:19 pm

one of those mistakes you only ever make once!!! at least it's sorted now though....
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
liquid079
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Tue May 03, 2005 11:00 pm
Location: The rolling hills of South Somerset

Post Sat Jan 20, 2007 6:55 pm

Yep thats true :chuckle:

Thanks for all the help anyway.

Dan.