ET 12's - any way to fit?

Need technical Q/A then you're in the right place

Moderator: martauto

Jackle
E30 Zone Newbie
E30 Zone Newbie
Posts: 208
Joined: Wed Jan 12, 2005 11:00 pm
Location: Tiverton, Devon

Post Thu Jan 18, 2007 1:39 am

I've got a set of MSW wheels that came with my car, I have been using a different set due to the fact that the MSW tend to rub on the rear arches too easily.

The car came already lowered about 40mm and the MSW's are ET12.

Is there are way I can get these on the car without the rubbing, and without too much expense?
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Post Thu Jan 18, 2007 9:29 am

Depends how wide they are... The only way you're gonna improve things is to fit narrower / lower profile tyres, but something like a 7J ET13 mim fits without any issues...
E30 in need of wiring loom smoke since April '11...
Jackle
E30 Zone Newbie
E30 Zone Newbie
Posts: 208
Joined: Wed Jan 12, 2005 11:00 pm
Location: Tiverton, Devon

Post Thu Jan 18, 2007 9:59 am

It did have 205/50's fitted and the sidewall of the tyres ended up with no writing on them!
I could try 195's, but I don't want to pay out to fit them if they don't work.
Hyperion
E30 Zone Squatter
E30 Zone Squatter
Posts: 1727
Joined: Tue Jul 12, 2005 11:00 pm
Location: JHB, South Africa

Post Fri Jan 19, 2007 6:31 am

Have you thought of either shaving the arch or rolling it?
Jackle
E30 Zone Newbie
E30 Zone Newbie
Posts: 208
Joined: Wed Jan 12, 2005 11:00 pm
Location: Tiverton, Devon

Post Fri Jan 19, 2007 4:51 pm

The arches look like they have already been (badly) rolled, don't know if I could get them any flatter. They could do with sorting out properly though.