nuts on rear subframe

Need technical Q/A then you're in the right place

Moderator: martauto

seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Thu Jan 18, 2007 8:04 pm

Taking of the rear sub frame and have been left with a nut on each side with two little lumps opposite each other on the nut, stupid explination, but tried taking it off with hammer and chisel but had enough it wasnt moving. does anyone know what type off socket I need for it. a 30mm socket was a little too big if I had a 29mm socket and could have forced it on. cheers
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Thu Jan 18, 2007 8:15 pm

sounds like the inner sleves have stayed seized to the car while the rubber part and outer sleve came away with the subframe dude.

the only nuts are @ the lower plates, have you knocked the "studs" back into the floorpan ??
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW
seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Thu Jan 18, 2007 8:32 pm

The lower plates are these the ones with two allen bolts each side? if so pulled these of and the studs. left with the studs and the described nuts.
I removed the diff bolt, subframe bolts, lower plates and hoses is their anything else I need to remove. cheers