Exhaust valve upgrade.

Discuss general engine, turbo and supercharger conversions in this section

Moderator: martauto

appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3482
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Tue Jan 16, 2007 5:02 pm

As you may be aware the 318is has sodium filled exhaust valves, I have been told that the valve head can become detached from the valve stem (the stuff nightmares are made off) when exposed to the extra heat/stresses of forced induction. The question, can anyone recomend a supplier of top grade one piece valves and are there any other mods worth doing whilst changing the valves. cheers :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
User avatar
jpboost
E30 Zone Newbie
E30 Zone Newbie
Posts: 163
Joined: Tue Apr 26, 2005 11:00 pm
Location: Croydon

Post Tue Jan 16, 2007 5:12 pm

plenty of FI engines have sodium filled valves in them as std. being sodium filled keeps the valve weight down, and reduces stress on the valvetrain. I'd be very sure that they are not up to the job before changing them.

If you really decide to change valves, I'm pretty sure schrick will do some to fit the 'is. not cheap though, around £50 each IIRC. don't forget new retainers, springs etc to match.
jaistanley
E30 Zone Addict
E30 Zone Addict
Posts: 2517
Joined: Tue Jan 18, 2005 11:00 pm
Location: Coventry and Essex

Post Wed Jan 17, 2007 1:35 pm

Try an american forum such as E30 tech. The E30 M42 engine shares valves with the American S50 I beleive (and possibly therefore the M50??) but don't quote me, I'm trying to remember stuff from before I started my stupid engine conversion and that was AGES ago!.. Incedentally I think you can also use the solid lifters and shims from the same engine if you want to ditch the hydraulic ones (better at high rpm but more servicing)

As for more mods.. Triple cut valves and valve seats are a MUST for any engine when doing anything to a head. It'll yeild more power than basic port work and gets you a nice gas seal into the bargain. You could also remove any flashing/casting finish from the ports with a flap wheel and die grinder but don't go mad polishing them to a shine. Bmw castings are pretty good so this shouldn't take long.

Jai
Image
WillG
E30 Zone Regular
E30 Zone Regular
Posts: 433
Joined: Wed Mar 29, 2006 11:00 pm
Location: Cheltenham

Post Wed Jan 17, 2007 4:30 pm

could try PPF, I know they do valves for other BMW engines not sure how much for
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Wed Jan 17, 2007 6:31 pm

M44 are not sodium filled, not 100% they'll fit though, heads are not interchangable
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Wed Jan 17, 2007 6:45 pm

Try ringing Race Engine Components(Tel : 01902 373770) to see if they do the valves for the m42.

For my M30 it was about £210 delivered for a set of 12 which is good value for what you get i think.
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3482
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Thu Jan 18, 2007 3:12 pm

will do cheers lads :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box