Hi all
Can someone please tell me where the engine breather pipe that goes from the front (nearest the front of the car) rocker/cam cover goes to? I've looked at a few engine pics in the gallery and its not clear on any of them. A decent pic of the engine taked from the passenger side will probably do.
Cheers Spadge...
318iS engine breather question
Moderator: martauto
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Last edited by SPADGE on Thu Jan 18, 2007 10:09 am, edited 1 time in total.
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
If it's the one on the front/top of the engine, i'm sure this goes/connects to all the breather hoses that are located under the inlet manifold.
Pal
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Cheers guys.
Its the one in the pic below, coming off the front of the rocker cover (not the manifold
), that has a longer pipe and little filter fitted to it at the moment.

Its the one in the pic below, coming off the front of the rocker cover (not the manifold

Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
That's the one Spadge, definately goes under the inlet mate....i'd get that filter thing off it too mate...
Also when locating it back to the correct place, check the rest of the hoses bud, as I went to replace that pipe and another one under the inlet I found that nearly all of them had perished
bugger to get too.
Pal
Also when locating it back to the correct place, check the rest of the hoses bud, as I went to replace that pipe and another one under the inlet I found that nearly all of them had perished
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Pal318is wrote:That's the one Spadge, definately goes under the inlet mate....i'd get that filter thing off it too mate...
Also when locating it back to the correct place, check the rest of the hoses bud, as I went to replace that pipe and another one under the inlet I found that nearly all of them had perishedbugger to get too.
Pal
Its going mate hence the question
I'll have a rummage under the inlet and see if anything else looks wrong
Cheers Spadge...
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
mark_i
- E30 Zone Regular

- Posts: 972
- Joined: Thu Aug 10, 2006 11:00 pm
- Location: Widnes
Spadge, that is a wierd set-up. By rights the cylinder head breather hose should be a closed circuit with the throttle body connection underneath the inlet manifold.
Venting the breather to atmoshere causes my M42 to idle like a pig... be interested to see the setup when we catch up next week if you still have it.
Venting the breather to atmoshere causes my M42 to idle like a pig... be interested to see the setup when we catch up next week if you still have it.

