Benefit of larger anti-roll bars?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Thu Jan 18, 2007 11:02 am

I have a 318i Touring, I know there are larger anti-roll bars available, but what is the benefit of these, and also, what is the benefit of adjustable anti-roll bars?
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
ian332isport
E30 Zone Team Member
E30 Zone Team Member
Posts: 5380
Joined: Wed Dec 22, 2004 11:00 pm
Location: West Sussex

Post Thu Jan 18, 2007 11:22 am

In general they help to stop body roll in corners (and the negative geometry changes that it creates). You can do this with stiff springs, but you also get a firmer ride this way. Anti roll bars don't generally stiffen the ride overall, although they will make some difference if only one wheel hits a bump, but not as bad as stiff springs.

Adjustable bars allow you to fine tune the handling characteristics of the car. You can increase or decrease understeer/oversteer by changing the relative stiffness of the bars.

In general, they are a good thing, and well worth fitting.

Ian.
If it aint broke - Modify it...
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Thu Jan 18, 2007 11:55 am

Ok, thanks for that, I understand a bit better now.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Thu Jan 18, 2007 3:39 pm

If you want to try it out, load up gran turismo on a playstation and have a play with suspension setup on there. Basically on my (fantasy) TVR I worked out that if I wanted more tail slidey action I'd soften the rear roll bar. Its the balance between the two that makes the difference. The more roll, the less grip as the tyres deform and the inside one gets lifted away from the ground. I could achieve the same affect by stiffening the front roll bar but once everything got too stiff it wouldn't slide until it was totally overloaded and then it snapped out too fast to control.

luckily it wasn't real so I'm still alive, but I'm told its pretty accurate. What we really need is an E30 on one of these games :)

Morat
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!