Wheel locking bolts

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

e30mclow
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Tue Oct 17, 2006 11:00 pm
Location: Now in the USA

Post Mon Jan 15, 2007 11:10 am

Has anybody got any recommendations for a decent set of locking nuts? I am paranoid about my new 16x9's being swapped for blocks when I go back to college in a few weeks. Iv seen cars sporting blocks around college before and I dont think the look would suit the e30's lines. Are there any types that are to be avoided?? I'v only had shit wheels in the past so it didn't matter. Thanks
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Mon Jan 15, 2007 3:02 pm

I have a set of McGard ones on each of our cars, replaced the standard BM ones as it was getting difficult to get the key in. However, on a recent visit to the local BM dealer I noticed the BM locking bolts are only £20 for a set, so great value.

I should point out though that I removed 3 of my original ones without the key, so they aren't especially difficult to defeat.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
User avatar
Mahmood
E30 Zone Camper
E30 Zone Camper
Posts: 1340
Joined: Mon Jan 10, 2005 11:00 pm
Location: People's Republic of Londonistan

Post Mon Jan 15, 2007 5:22 pm

McGard, you can get them at Halfrauds for about £40 a set.
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Mon Jan 15, 2007 5:25 pm

I got mine (McGard ones) brand new from eBay for around £25 posted.

I reckon they would prob come off the same way the BM ones did though, so you might as well just go for BM ones at £20.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
User avatar
rmt
E30 Zone Newbie
E30 Zone Newbie
Posts: 112
Joined: Tue Mar 22, 2005 11:00 pm
Location: Surrey

Post Mon Jan 15, 2007 5:49 pm

The ones from BMW are not the same as they used to be. I replaced my original key type ones with new ones from BMW that use something like a star shaped socket to remove them.
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Mon Jan 15, 2007 7:10 pm

Thats what mine had from new, same as on our old '02/51 Mini, and on a colleagues '03 plate E39.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Jan 15, 2007 8:01 pm

Im sure they are only £17 something from the dealers :?
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Mon Jan 15, 2007 9:15 pm

Yeah, I was suprised when I saw them advertised at the parts desk at only £20 inc VAT.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
drewjak
E30 Zone Regular
E30 Zone Regular
Posts: 410
Joined: Sat May 20, 2006 11:00 pm
Location: cumbria, england

Post Wed Jan 17, 2007 6:23 am

genuine ones r ok, but the key will fit any genuine locking nuts :eek: , so the £16.98 from the dealers is worth it to any scum bag who fancys a nice set of wheels, so genraly not a good idea if ya wheels r worth afortune, at the end of the day there just a deterant if they want them they`ll take them, if you love your wheels that much put 2 locks on each wheel.
m-dtech
Unapproved Trader caution
Posts: 2068
Joined: Thu Sep 01, 2005 11:00 pm

Post Wed Jan 17, 2007 10:50 am

i bought some from here

http://www.priracing.com/
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Jan 17, 2007 11:08 am

drewjak wrote:genuine ones r ok, but the key will fit any genuine locking nuts :eek:
No they wont. The number of splines, spacing and diameter is different.
m-dtech
Unapproved Trader caution
Posts: 2068
Joined: Thu Sep 01, 2005 11:00 pm

Post Wed Jan 17, 2007 11:24 am

DanThe wrote:
drewjak wrote:genuine ones r ok, but the key will fit any genuine locking nuts :eek:
No they wont. The number of splines, spacing and diameter is different.
try these

http://www.priracing.com/section.php?xSec=58
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Wed Jan 17, 2007 11:30 am

If your really worried, buy 3 different sets of locking wheel nuts and mix and match on each wheel.

PITA if you get a puncture, and even a determined theif would still beat them, but it would put most people off!
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Jan 17, 2007 11:35 am

Or just get a pucka car alarm with the 'tilt sensor'.
Only cost me £20 for the addition to my Toad
spence_star
E30 Zone Regular
E30 Zone Regular
Posts: 512
Joined: Thu Nov 23, 2006 11:00 pm
Location: London

Post Wed Jan 17, 2007 11:45 am

mate not matter what locking nuts u have on your wheels they are easily unlocked. i was amazed when i saw how easy and how quick it was to be unlocked.

Basically i bought a S**T set from Halfords called Mc Garde, so dont buy these pleaseee...Anyway i was putting them on and after putting on the 2nd one the key broke. The tread on the key was damaged already. Mind you i was hand tightening them.

I called a mate to drill them off for me because thats what i thought they do, and what he did shocked me. i was like is that it? he said yes thats all it is.

The main thing is where u park. dont park in a quiet place where there are no houses or shops. And if u wanted to be even more sure buy 2 sets of locking bolts to make theives take a little longer.
Returned after many years out.
User avatar
FlashBastd
E30 Zone Newbie
E30 Zone Newbie
Posts: 233
Joined: Sat Aug 13, 2005 11:00 pm
Location: West Yorks

Post Wed Jan 17, 2007 11:54 am

Yep, I was horrified at how easy it was to remove them the first time I had to take some off without the key.

At the end of the day they are only a deterrant. If someone really wants your rims, you won't stop them.
1993 E30 318i Lux Auto Touring - SOLD
2001 Ford Mondeo 2.5 Zetec-S 5dr - SOLD
2004 Lexus IS300 Limited Edition Auto - SOLD
2005 Honda CR-V 2.0i Executive Auto
2001 Ford Puma 1.7i Black
e30mclow
E30 Zone Newbie
E30 Zone Newbie
Posts: 123
Joined: Tue Oct 17, 2006 11:00 pm
Location: Now in the USA

Post Wed Jan 17, 2007 12:27 pm

I was thinking of putting 2 sets on just to be extra safe. I could just weld them onto the hub????? JOKE joke joke don't attack! :D I'm after moving to proper accomadation with pleanty cameras, electric security gate etc so it won't be too bad this yr. Thanks for all the advice guys
m-dtech
Unapproved Trader caution
Posts: 2068
Joined: Thu Sep 01, 2005 11:00 pm

Post Wed Jan 17, 2007 1:49 pm

dont matter what you use lol, socket, bar and hammer and they come off like every other nut.
drewjak
E30 Zone Regular
E30 Zone Regular
Posts: 410
Joined: Sat May 20, 2006 11:00 pm
Location: cumbria, england

Post Wed Jan 17, 2007 10:16 pm

DanThe wrote:
drewjak wrote:genuine ones r ok, but the key will fit any genuine locking nuts :eek:
No they wont. The number of splines, spacing and diameter is different.
i work in a garage m8, ive used my own key a few times on customers cars when we could`t find their key, (bmw`s obviously) and ive used mine in scrap yards twice to remove lockinnuts and they`ve all fit perfect!
so maybe the pattern is`t that random afterall, or ive just been lucky?
miniblob
E30 Zone Addict
E30 Zone Addict
Posts: 3153
Joined: Thu Jan 05, 2006 11:00 pm
Location: Croydon/Uckfield

Post Wed Jan 17, 2007 10:23 pm

I was thinking about getting the McGuards ones, purely 'cos they're available in black!!!!

Read on here somewhere (i think) that standard bmw wheelbolts are black and about £1 each too, so when i get my schnitzers done black, i'll just buy a new set of bolts and lockers so i don't have to mess about trying to spray them or whatever!!
327 Touring with bass!!!

>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>