RHD E30 M3 ?
Moderator: martauto
-
Boobs
- E30 Zone Newbie

- Posts: 3
- Joined: Sat Sep 02, 2006 11:00 pm
Quick question guys, is there such a thing build at the factory ?
Cheers
Robin
Cheers
Robin
-
bodders
- E30 Zone Newbie

- Posts: 68
- Joined: Fri Jan 12, 2007 11:00 pm
Not as far as i know.
All E30 M3's are LHD.
Feel free to correct me if i'm wrong people!
All E30 M3's are LHD.
Feel free to correct me if i'm wrong people!
-
Boobs
- E30 Zone Newbie

- Posts: 3
- Joined: Sat Sep 02, 2006 11:00 pm
Can anyone shed any light on what this is all about then ?
http://atsearch.autotrader.co.uk/www/CA ... =443758392
http://atsearch.autotrader.co.uk/www/CA ... =443758422
http://atsearch.autotrader.co.uk/www/CA ... =443758392
http://atsearch.autotrader.co.uk/www/CA ... =443758422
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
No such thing as factory built rhd e30 m3 ! I think the likes of Birds did some rhd conversions on new e30 m3's at the time,but this was of course using the slower 325 rack and tends to "dull" the responses of said m3's 
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Also the brakes would be less responsive, owing to the crossover linkage running transversely across the bulkhead.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
I heard there was a one off RHD covertible for someone with importance
birds apparantly did about 25 conversion
birds apparantly did about 25 conversion

-
old_skool
- E30 Zone Team Member

- Posts: 3405
- Joined: Fri Sep 01, 2006 11:00 pm
- Location: Glossersure
Eh? Care to explain that?Also the brakes would be less responsive, owing to the crossover linkage running transversely across the bulkhead.
-
Rich_W
- E30 Zone Addict

- Posts: 2932
- Joined: Mon Jan 10, 2005 11:00 pm
Converted car. Can tell because the "Drivers" seat has the inner release lever on it. Plus it claims to be HPI clear which would show up as a 325 or similar.
Bottom line is twofold
1) Converted cars are worth less than unmolested ones. Especially RHD conversions!
2) LHD is not even an issue on the roads of the UK. Hell even Multi storeys (which I use occasionally) are only a case of being accurate when you pull up to the ticket machine.
There are "rumours" (unsubstantiated) by the President of the BMW CC New Zealand that BMW flew out some techs in the 80s and hand made a 1 off RHD car. I doubt they would bother sending people to NZ just for that when they could knock it out in Germany and ship it there far more easily. Given this guy claims to own the car makes me smell the BS from 18500km away!
Bottom line is twofold
1) Converted cars are worth less than unmolested ones. Especially RHD conversions!
2) LHD is not even an issue on the roads of the UK. Hell even Multi storeys (which I use occasionally) are only a case of being accurate when you pull up to the ticket machine.
There are "rumours" (unsubstantiated) by the President of the BMW CC New Zealand that BMW flew out some techs in the 80s and hand made a 1 off RHD car. I doubt they would bother sending people to NZ just for that when they could knock it out in Germany and ship it there far more easily. Given this guy claims to own the car makes me smell the BS from 18500km away!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the servo is on the left hand side, the bar which is used on the RHD cars has a little play in them 10-20mm where you press the pedal and nothing happens. Plus so i am told there is less braking feel because of this.old_skool_2002 wrote:Eh? Care to explain that?Also the brakes would be less responsive, owing to the crossover linkage running transversely across the bulkhead.
Apparently the LHD cars give alot more feel through the brake pedal. I've never driven an M3 so can't compare
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Bloody kiwis ! 
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Its easy to get round this.Simon13 wrote:the servo is on the left hand side, the bar which is used on the RHD cars has a little play in them 10-20mm where you press the pedal and nothing happens. Plus so i am told there is less braking feel because of this.old_skool_2002 wrote:Eh? Care to explain that?Also the brakes would be less responsive, owing to the crossover linkage running transversely across the bulkhead.
Apparently the LHD cars give alot more feel through the brake pedal. I've never driven an M3 so can't compare
Andrew
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Early RHD E30s suffered from the bulkhead flexing where the bell crank is mounted behind the glovebox. From about '88 on an extra brace was added across to the transmission tunnel, which greatly improved the brake feel on RHD cars.Simon13 wrote:old_skool_2002 wrote: Apparently the LHD cars give alot more feel through the brake pedal. I've never driven an M3 so can't compare
Still a linkage involved though, with two bell cranks to flex, so still not as good as LHD.
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
I think BMW australia converted a few for OZ consumption.
Demlot.. How do you get round the flex?
Demlot.. How do you get round the flex?
-
Boobs
- E30 Zone Newbie

- Posts: 3
- Joined: Sat Sep 02, 2006 11:00 pm
I have just HPi'd it and is shows as an M3 with a WBS chassis number registered 2.8.89 - 12 owners though !
Rich_W wrote:Converted car. Can tell because the "Drivers" seat has the inner release lever on it. Plus it claims to be HPI clear which would show up as a 325 or similar.
Bottom line is twofold
1) Converted cars are worth less than unmolested ones. Especially RHD conversions!
2) LHD is not even an issue on the roads of the UK. Hell even Multi storeys (which I use occasionally) are only a case of being accurate when you pull up to the ticket machine.
There are "rumours" (unsubstantiated) by the President of the BMW CC New Zealand that BMW flew out some techs in the 80s and hand made a 1 off RHD car. I doubt they would bother sending people to NZ just for that when they could knock it out in Germany and ship it there far more easily. Given this guy claims to own the car makes me smell the BS from 18500km away!
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Look like a good car from the pics.
Even the window wipers are on the right way!
Andrew
Even the window wipers are on the right way!
Andrew
-
old_skool
- E30 Zone Team Member

- Posts: 3405
- Joined: Fri Sep 01, 2006 11:00 pm
- Location: Glossersure
Looks proper nice to me. Who cares if it's RHD, OK apart from a serious collector i suppose. But if you wanted it to drive around here in the UK surely it would be a bonus being RHD? IF it was converted properly then surely that's fine.
Nice wheels, really suit the car. Are they genuine Hartge wheels?

Shame about the rocker cover. You'd have thought they would have steam cleaned the engine bay. Bonus that it hasn't though when you think about it.

In fact the more I look at the pictures the more I want to go and buy it
Nice wheels, really suit the car. Are they genuine Hartge wheels?

Shame about the rocker cover. You'd have thought they would have steam cleaned the engine bay. Bonus that it hasn't though when you think about it.

In fact the more I look at the pictures the more I want to go and buy it
-
old_skool
- E30 Zone Team Member

- Posts: 3405
- Joined: Fri Sep 01, 2006 11:00 pm
- Location: Glossersure
It's sold
Will the new owner please step forward 
-
tonym3
- E30 Zone Newbie

- Posts: 39
- Joined: Mon Jul 10, 2006 11:00 pm
i owned a rhd converted by birds for 5 years i sold it to someone in japan a few years ago i was told that u can use the same rack on the conversion but it had to be reversed .
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
You cant use the same rack
But the birds cars were top work!
Andrew
But the birds cars were top work!
Andrew
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i really can't see it being a massive problem. i wouldn't mind a right hooker.
The manifolds Bird's made for them lose no power so it's just like driving a normal e30.....so it cannot be that bad!
but purists will no doubt say otherwise
it's like the other question about why didn't bmw fit a 6 pot to the M3? everyone i have spoke to who have ever driven an Alpina B6S and a normal M3 say there is no difference..........
The manifolds Bird's made for them lose no power so it's just like driving a normal e30.....so it cannot be that bad!
but purists will no doubt say otherwise
it's like the other question about why didn't bmw fit a 6 pot to the M3? everyone i have spoke to who have ever driven an Alpina B6S and a normal M3 say there is no difference..........
-
Steve-E30
- East Sussex Hooligan
- Posts: 5876
- Joined: Fri Apr 21, 2006 11:00 pm
Can i just say that car rings a bell with a few of us , If its the same car its been converted and thats not the only one he did 
-
GermanGorilla
- E30 Zone Regular

- Posts: 528
- Joined: Mon Feb 07, 2005 11:00 pm
Hi,
The biggest problem converting the E30 M3 to RHD is the wiring and the
time in man hours to do it.
60-70 % of the Birds cost of the conversion was electrical.
Ask Kevin Bird.
Steering rack, fit a Z3 Rack and its quicker than the original M3,
Brakes, stiffen the spring on the cross bulk head mechanisim,
fit some decent 4 pot or 6 pot calipers up front, and some 325mm
discs, decent pads allround, and you would need to be Cecotto
to tell the difference.
Drive a RHD M3 with these few alterations and you do start to wonder
what all the fuss is about.
Regards,
The Gorilla.
The biggest problem converting the E30 M3 to RHD is the wiring and the
time in man hours to do it.
60-70 % of the Birds cost of the conversion was electrical.
Ask Kevin Bird.
Steering rack, fit a Z3 Rack and its quicker than the original M3,
Brakes, stiffen the spring on the cross bulk head mechanisim,
fit some decent 4 pot or 6 pot calipers up front, and some 325mm
discs, decent pads allround, and you would need to be Cecotto
to tell the difference.
Drive a RHD M3 with these few alterations and you do start to wonder
what all the fuss is about.
Regards,
The Gorilla.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
I think that could be a very good way of looking at it.
I've read that BMW never did the RHD cars because it would of pushed up the production costs so much that it would of priced the car out of the market it was intended for. So in reality there is no reason why a good RHD can't be made
Still alot of people think otherwise
I've read that BMW never did the RHD cars because it would of pushed up the production costs so much that it would of priced the car out of the market it was intended for. So in reality there is no reason why a good RHD can't be made
Still alot of people think otherwise
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I was always under the impression it was down to keeping the weight spread around equally, with the engine tilting towards the RHS then the best place for the driver is going to be on the LHS right?
-
GermanGorilla
- E30 Zone Regular

- Posts: 528
- Joined: Mon Feb 07, 2005 11:00 pm
Hi,
DanThe- your absolutely correct, thats why all RHD BMW's are
bastardsied versions of the original design.
Most BMW's have inclined engines, to the right.
But go drive a LHD E46 M3 and then go drive a RHD E46 M3,
and if you notice a whole lot of difference give Frank Willaims a call.
I have yet to see that LHD E46 M3 CSL is any quicker than a RHD one.
You have to be right on the limit to notice it and doubt if many here would
get within 10 % of it.
Regards,
The Gorilla.
DanThe- your absolutely correct, thats why all RHD BMW's are
bastardsied versions of the original design.
Most BMW's have inclined engines, to the right.
But go drive a LHD E46 M3 and then go drive a RHD E46 M3,
and if you notice a whole lot of difference give Frank Willaims a call.
I have yet to see that LHD E46 M3 CSL is any quicker than a RHD one.
You have to be right on the limit to notice it and doubt if many here would
get within 10 % of it.
Regards,
The Gorilla.
-
jaistanley
- E30 Zone Addict

- Posts: 2517
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Coventry and Essex
I agree with the above, Gorilla.
I've often thought about getting an M3 shell later on, and re-shelling my (still work in progress) Rhd S50B32 engined 325i into it. If I took everything from the std E30 shell and put it into the M3 shell its basically just man hours, nothing difficult.
I think it'd be an awesome car but the purists would go nuts! I have no rational reason for disliking lhd cars, I just think it's unique(ish)ness would make it an interesting car.
Jai
I've often thought about getting an M3 shell later on, and re-shelling my (still work in progress) Rhd S50B32 engined 325i into it. If I took everything from the std E30 shell and put it into the M3 shell its basically just man hours, nothing difficult.
I think it'd be an awesome car but the purists would go nuts! I have no rational reason for disliking lhd cars, I just think it's unique(ish)ness would make it an interesting car.
Jai

-
Rich_W
- E30 Zone Addict

- Posts: 2932
- Joined: Mon Jan 10, 2005 11:00 pm
BecauseSimon13 wrote:it's like the other question about why didn't bmw fit a 6 pot to the M3? everyone i have spoke to who have ever driven an Alpina B6S and a normal M3 say there is no difference..........
1) The Homologation rules at the time would of meant it was in a different class. (A instead of B)
2) A 4pot is lighter and crucially shorter, so can fit mainly behind the wheels in a E30.
ref the Birds cars. Well I wouldnt recommend anybody go to them for any work. Put it that way...
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
I'm talking road cars here not DTM's as maybe 1 or 2 peeps on here have driven a works M3 chariot.
And what do you seriously know about Birds workshop then? Your knowledge and evidence best be better than your driving skills!
And what do you seriously know about Birds workshop then? Your knowledge and evidence best be better than your driving skills!
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
What's wrong with Birds??
Please do elaborate.
Sal
Please do elaborate.
Sal
-
215m3
- E30 Zone Regular

- Posts: 328
- Joined: Sun Oct 23, 2005 11:00 pm
Having driven on a track with both RHD and LHD cars, i felt more comfortable and the car more composed sitting on the left. Would it also have something to do with most circuits being clockwise?
-
Rich_W
- E30 Zone Addict

- Posts: 2932
- Joined: Mon Jan 10, 2005 11:00 pm
So am I. The WHOLE point of the M3 was to go racing. So all the choices BMW made when designing it were around the homologation. Thats why they didnt fit a straight 6. Or a 2Litre turbo. (they have before in the 320 Turbo of course) Remember this car was up against the Cossies in the BTCC and the GTR's in Oz. On that point although BMW won the BTCC several times, it wasnt on outright pace. The rules were that each winner of class got the same points. So the RS500s won a lot of races overall. But because Sytner got the same points for coming first in Class B regardless of the fact he wa maybe 3 or 4th overall he would end up leading the championship.Simon13 wrote:I'm talking road cars here not DTM's as maybe 1 or 2 peeps on here have driven a works M3 chariot.
Thats because there were a lot of competitive people in Class A so Rosue may win a race, then Bristow etc etc. So the points got speread around more. So nobody really took a series lead. Does that make sense?
I paid several hundred pounds to have my selector shaft seal renewed and my gearlinkage repaired/replaced to remove any play in it.And what do you seriously know about Birds workshop then?
Its still leaking and theres still 3/4" of play in the linkage. When I queried it? "They all do that!"
Tossers.
Nice snotty comment about an event over 2 years ago! Must be fun being perfect in every way. And never fucking up...


