Bmw diff ratio gurus help needed.please

Need technical Q/A then you're in the right place

Moderator: martauto

drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Sun Jan 14, 2007 11:40 pm

Hi Guys,

As some of you may no im just about to fit a v8 to my 325i. I currently run a 3.73 lsd diff and the car is running at about 2750rpm at 100kph (60mph).

Now the car will put down around 260hp atw with the new v8

and more low down tourqe (more than a turbo m20 at low revs). im changing the gearbox to a w55 supra gearbox with these ratios

W55: 1st 3.57:1, 2nd 2.06:1, 3rd 1.38:1, 5th 0.85:1

First question what will my car be revving at with the 3.73 and the toyota box 100kph? approx

Second question, i have a 2.93lsd avaialible, what will this be revving at 100kph with the toyota box ratios? approx

An is this diff as strong as the 3.73lsd?

cheers you help and input is really appreciated

Riley
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Sun Jan 14, 2007 11:45 pm

Really i just want to know what diff would suit this setup best? i know it will get off its arse very quick with the v8
and a 3.73, but im afraid it will be revving to high and all that tourqe will be wasted.

Im also a bit worryed that the 2.93 may be a bit high ratio, and to low in the revs, and not so good off the mark?
thoughts ? cheers
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sun Jan 14, 2007 11:49 pm

What v8 is it? Knowing what it will rev to would help!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Sun Jan 14, 2007 11:52 pm

hehe that was quick! its a quad cam lexus v8(1uzfe) with full after market comp, induction, exhaust.
They rev very well compared with most v8s :cool:
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Mon Jan 15, 2007 12:04 am

Would have thought 3.64:1 or higher geared would be best. This might help: http://www.behindmatrix.com/e30/fotost/ ... f00023.htm
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Mon Jan 15, 2007 1:17 am

even tho the 3.73 is so close to the 3.64 ? 2.93 is to high?
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Mon Jan 15, 2007 8:59 am

Sounds like the 2.93 is the go, its revving around 2450rpm @ 100kph
3.73 is 3050rpm @100kph

Also the 2.93 @ 85kph i around 3900rpm right in the meat!
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Mon Jan 15, 2007 1:02 pm

As long as the 2.93 LSD is the large case type (fitted to the 325i, etc) it sounds like it should be fine for the job. Be sure to post up some pics of this conversion! 8)
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
drifty325i
E30 Zone Regular
E30 Zone Regular
Posts: 647
Joined: Tue Jan 11, 2005 11:00 pm
Location: Rangiora, New Zealand

Post Mon Jan 15, 2007 11:47 pm

He said its a medium case diff is that the same?