stereo wiring
Moderator: martauto
-
th3_duckst3r
- E30 Zone Newbie

- Posts: 9
- Joined: Mon Nov 27, 2006 11:00 pm
could some kind person give me some help with the wires on my iso and what each one does i know the speaker wires but my stereo is not holding its memory so i need to know what wires are for what and what colours they should be seems theres a wire that is cut red y yellow in colour(previous owner) car is e30 320i f plate
thanx guys
thanx guys
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Radio loom has a four pin plug that goes into the top left corner of the accessories socket at the back of the glovebox.
brown = earth
white/purple = ignition switched 12V+
red/green = 12V+ permanent live (memory)
grey/red = panel lamps.
Late looms have an ISO connector, and have a blue wire from the instrument cluster, which is for speed sensitive volume control.
brown = earth
white/purple = ignition switched 12V+
red/green = 12V+ permanent live (memory)
grey/red = panel lamps.
Late looms have an ISO connector, and have a blue wire from the instrument cluster, which is for speed sensitive volume control.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi I have same prob.F reg 320i. all wires are on connector block,no radio.So the question is would a new loom have plug that goes into back of radio or is it a case of getting new plug for back of radio and fitting wires to connector block.

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Late looms from 92? - 93? cars have an ISO connector fitted.
A Touring of mine with one fitted, presumably as standard has a VIN of CL57293, if you want to try that into the dealer's ETK.
A Touring of mine with one fitted, presumably as standard has a VIN of CL57293, if you want to try that into the dealer's ETK.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi my Vin starts WEBAHH so will probably not have ISO fitted?

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
That's the LAST seven digits of the VIN I gave. These are the ones that identify your car.
F reg won't have the ISO connector, but if you get a loom from BMW for the VIN I gave, then it should have, and will plug in to your accessories socket.
Otherwise just buy an ISO connector with flying leads from Halfrauds or similar, and splice it on to your radio loom.
F reg won't have the ISO connector, but if you get a loom from BMW for the VIN I gave, then it should have, and will plug in to your accessories socket.
Otherwise just buy an ISO connector with flying leads from Halfrauds or similar, and splice it on to your radio loom.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi thanks. I fancy doing it properly and get the loom so might call into my local dealer and get price. The wiring looks kind of bodged. Jim

-
th3_duckst3r
- E30 Zone Newbie

- Posts: 9
- Joined: Mon Nov 27, 2006 11:00 pm
thanx for replies havent sorted yet no time but mines has iso connectors wired up 2 blocks ,1 block has the speaker wires ,the other has the power so forth ,but 1 red wire which is cut (previous owner) ill try take a picture of my 2 blocks .also power areil aint working either connections look good so wondering if ariel is naff anyway to test.12v battery perhaps?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Aerial has a red and white wire as a parallel pair running back the LH sill.
Red wire is 12V+ permanent live and the white wire is control (0V = aerial down, 12V = aerial up).
Red wire is 12V+ permanent live and the white wire is control (0V = aerial down, 12V = aerial up).
-
th3_duckst3r
- E30 Zone Newbie

- Posts: 9
- Joined: Mon Nov 27, 2006 11:00 pm
thanks brian
could this be the wire thats cut,do the wires run into the iso connector for the ariel power sorry but a complete novice with wires,so i would have all the power wires in to 1 iso connector speaker wires in the other iso connector,so if i have a white wire and a red wire which is cut these would be for power ariel? so i need to link the red one back up?
could this be the wire thats cut,do the wires run into the iso connector for the ariel power sorry but a complete novice with wires,so i would have all the power wires in to 1 iso connector speaker wires in the other iso connector,so if i have a white wire and a red wire which is cut these would be for power ariel? so i need to link the red one back up?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The red wire goes to the top left terminal (z) of the accessories socket at the back of the glovebox, and gets power from fuse 28.
The white wire needs to go to the radio, but all the E30s I have with the ISO set up are Tourers, which of course, don't have power aerials, so, I can't really answer this one. Probably is a pin for a power aerial on the standard ISO connector, but I don't have a diagram.
The white wire needs to go to the radio, but all the E30s I have with the ISO set up are Tourers, which of course, don't have power aerials, so, I can't really answer this one. Probably is a pin for a power aerial on the standard ISO connector, but I don't have a diagram.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Hi guys.Brianmoooore wrote:Radio loom has a four pin plug that goes into the top left corner of the accessories socket at the back of the glovebox.
brown = earth
white/purple = ignition switched 12V+
red/green = 12V+ permanent live (memory)
grey/red = panel lamps.
Late looms have an ISO connector, and have a blue wire from the instrument cluster, which is for speed sensitive volume control.
I have a H Reg Coupe. If I want to redo the bodge audio wiring in my car, can I get a loom from BMW or elsewhere that will go from a neat accessories panel plug and end in an ISO plug?
If I can, do I then just wire in the 4 x speaker cables and Aerial in separately to that ISO end?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Late tourings (I have an 'L' reg) came with a radio loom that ended in an ISO connector, so BMW made one. No idea on the part number or if it's available.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
The accessory panel end oes not also supply aerial and speaker feeds tho right?
Thanks Brian.
Thanks Brian.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
aerial and speakers aren't to the accessory panel as you say, but they're connected to the ISO. Don't know how - I haven't looked in that much detail.
All I know for sure is that the ISO hasn't been spliced on to an ordinary radio loom and that the ISO includes a blue wire from the green socket on the speedo for speed sensitive volume control.
This particular touring is the intended recipient for my next, imminent M50 conversion, so it will all be investigated in detail eventually.
All I know for sure is that the ISO hasn't been spliced on to an ordinary radio loom and that the ISO includes a blue wire from the green socket on the speedo for speed sensitive volume control.
This particular touring is the intended recipient for my next, imminent M50 conversion, so it will all be investigated in detail eventually.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I would have thought the acessories panel provides specific consistent current/voltage so radio settings are not lost etc to the ISO plaug.Brianmoooore wrote:aerial and speakers aren't to the accessory panel as you say, but they're connected to the ISO. Don't know how - I haven't looked in that much detail.
Then aerial and speakers must be wired into the ISO plug to comploete the inputs.
I guess I'll upgrade my Aerial and Speaker cable while I'm at it and tidy up the all that junk round the back.
Cheers all.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Another way to do a neat ISO conversion is to use the original old E30 loom and plug and get an ISO adapter. Can anyone tell me which of the below stereo looms is that one? The original loom that goes from accessory panel to pre-ISO standard plug that you then just plug an ISO adapter onto?

It's not too clear...

It's not too clear...
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If the ETK pics are anything like accurate, I would guess at 5. Looks like its got the ISO connector, the plug to the accessories socket, four speaker connections, plus three other connectors - aerial, speed volume and ?.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
I have ordered '5'.
When it arrives I'll take pix and hopefully it will mean minimal wiring for an ISO standard fitment.
When it arrives I'll take pix and hopefully it will mean minimal wiring for an ISO standard fitment.
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
I got an ISO adapter from halfrauds for my E reg Touring and of course it didn't fit despite my car having the original Panasonic radio/cassette fitted. But I was lucky because cables from the existing head unit were the same colours as the adapter and ran back to a long connecting block. I just cut the chassis side plug from the adapter I had bought and connected the cables into the block one at a time keeping to the existing colour scheme.
If you don't have the same luck with the cable colours I could take a photo of mine and it would show you which modern colour goes to what original colour on the loom?
If you don't have the same luck with the cable colours I could take a photo of mine and it would show you which modern colour goes to what original colour on the loom?
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
That could work if this loom isn't the right one.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
If you don't have the same luck with the cable colours I could take a photo of mine and it would show you which modern colour goes to what original colour on the loom?[/quote]
Pictures would be good as I am about to change radio in touring,and am looking at both options.
PS Has anyone priced the loom ?
Pictures would be good as I am about to change radio in touring,and am looking at both options.
PS Has anyone priced the loom ?

-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
It was £30 quid for a BMW one (assuming it's the right one).
But there's another thread on here about this exact same issue - the guy found one for £20 and has a picture of it:
http://www.e30zone.net/modules.php?name ... 322#599322
But there's another thread on here about this exact same issue - the guy found one for £20 and has a picture of it:
http://www.e30zone.net/modules.php?name ... 322#599322
