Head Gasket Help

Need technical Q/A then you're in the right place

Moderator: martauto

Steve-E30
East Sussex Hooligan
Posts: 5876
Joined: Fri Apr 21, 2006 11:00 pm

Post Sun Jan 14, 2007 11:54 am

Friend of mine has just bought a 325 , Took it out last night and it started to overheat :? Checked the water and it looks like its mixing with the oil , Its also losing water quite bad , Whats involved in doing a head gasket on these as have never done one on a bmw , And what is needed please , Anything that he could change as well whilst the head is off ??
Might be going up there this week to help do it so wanna be prepared and make sure we have everything .
Also i take it the head will need skimming or are they quite safe ?
Is there a guide to doing one that is posted somewhere as couldnt find one .
Cheers in advance :)
User avatar
pnd
E30 Zone Squatter
E30 Zone Squatter
Posts: 1801
Joined: Sat Nov 12, 2005 11:00 pm

Post Sun Jan 14, 2007 11:55 am

Anything that he could change as well whilst the head is off ?? YES THE HEAD PROBABLY
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sun Jan 14, 2007 12:01 pm

If the head is ok, it will need a skim. New cambelt, tensioner & water pump.

Sadly, chances are that it's cracked...
Image
Steve-E30
East Sussex Hooligan
Posts: 5876
Joined: Fri Apr 21, 2006 11:00 pm

Post Sun Jan 14, 2007 1:21 pm

The heads arent safe then ...DOH , Ill have to give him the bad new :?
So posiblitys are we are gonna need a head :?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Jan 14, 2007 2:20 pm

Get the engine up to temp, take the rocker cover off, plug the breather hose, and start the engine.
When the coolant gets up to pressure, look carefully at the bottom of the two rearmost cam bearings, and you might well be able to see beads of water coming out from under the cam, confirming that it has cracked.
Keep an eye on the plate at the front of the engine that locates the two rocker shafts, to make sure it doesn't work out of place.