window washer pipeline.

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jonam
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Thu Jan 11, 2007 11:00 pm

Post Sat Jan 13, 2007 10:27 pm

how do i clean out lines????????
and if those aint blocked, how do i remove the jets on the bonnet???
i know i sound silly but how?? :o:
johnna
E30Zone Irregular
Posts: 1715
Joined: Sat Sep 17, 2005 11:00 pm
Location: In the hole

Post Sat Jan 13, 2007 10:32 pm

B & q sell homebrew poly pipe and poly pipe unions. They have to put up with stuff that is even rougher thAn ethylene glycol! Buy fair bit of it and replace your lines.

The washer jets do clog up and are pennies at the dealer.
Under the bonnet, either side of the inlet spout, there are two tabs which need pushing inwards to allow the jet to be pushed up through and out of the bonnet.
Be a man for once in your life and sh!t in that boot!- Wilfred.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Jan 13, 2007 10:33 pm

Take the pipes off the back of the jets and flush them out backwards by pushing a hose against the nozzles.
Flush the pipes simply by working the wasger pump.
Clean out the resevoir first though. You can just pull the pump(s) out to get it completely free of the car.
User avatar
jonam
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Thu Jan 11, 2007 11:00 pm

Post Sat Jan 13, 2007 10:35 pm

:D Cheers people, you have been a great help, love to race ya one day ( as long as you dont have M3)!!!!! :cool:
suzie650
E30 Zone Regular
E30 Zone Regular
Posts: 460
Joined: Sat Oct 21, 2006 11:00 pm
Location: CH

Post Sat Jan 13, 2007 11:30 pm

And how do you proceed for the rear one on a touring?
Cheers!
User avatar
jonam
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Thu Jan 11, 2007 11:00 pm

Post Sun Jan 14, 2007 12:44 am

now what do you mean??? :)