318is kw suspention
Moderator: martauto
-
jackdaniels318is
- E30 Zone Newbie

- Posts: 37
- Joined: Mon Dec 25, 2006 11:00 pm
anyone ever used these on standard m-tech suspention? just as am thinking of getting the 60/40 springs also does this make it less tail happy? thanks.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i'd use non standard shorter dampers if i was going 60/40 drop mate. It just won't work otherwise and the standard dampers will be fubar'd in no time.
H&R cupkit springs are the same drop and soft on the back and this does help stop the back end coming out when pushing on, it also seems to allow much better traction too. Also the shocks will be suited for the springs
i have no experience of KW stuff
hth
H&R cupkit springs are the same drop and soft on the back and this does help stop the back end coming out when pushing on, it also seems to allow much better traction too. Also the shocks will be suited for the springs
i have no experience of KW stuff
hth
-
benjy
- E30 Zone Regular

- Posts: 662
- Joined: Mon Jan 02, 2006 11:00 pm
- Location: English Riviera
I have an H&R 60/40 cupkit on my iS and to be honest i think the shocks are a bit soft (at least for my thinkin!) When i pull away and as i let the clutch out after changin up the back does tend to squat a bit, nothing excess but i can feel it from the drivers seat. HTH benjy
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
So the back end gets traction. On cheap 60mm drops the back end is rock hard and just breaks out all the time which is no good
-
benjy
- E30 Zone Regular

- Posts: 662
- Joined: Mon Jan 02, 2006 11:00 pm
- Location: English Riviera
Ive got 9" rears with toyo t1r's 215/45 16. They are crap in the wet but in the dry with a bit of heat there good. The only prob is the tyres rub, only just mind!! 
Gaffa tape is like "the force" - it has a light side, a dark side, and it holds the universe together.
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
There's nothing that shouts "Poor Workmanship" more than wrinkles in the Gaffer tap
-
Pal318is
- E30 Zone Addict

- Posts: 3494
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Kop End - Bedford
I have Eibach 40mm drop springs on mine, which are pretty good imo, no real knowledge of the kw springs, but have heard mixed reviews of the kw coilovers.
HTH
Pal
HTH
Pal
Pal
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
[img]http://
M42's Run in the Family...The kids sayin 'YNWA'
