Hi All,
Just wanted to know if there is anything i can do with my exhaust. I've now got a powerflow exhaust system on my 325 but ever since it was fitted the middle box does not go all the way up and sometimes scrapes speed humps. I want to lower it but can't until i can solve this problem anyone got any ideas or could possibly help?
Cheers
Win
Exhaust Problem
Moderator: martauto
-
win
- E30 Zone Newbie

- Posts: 87
- Joined: Sun May 28, 2006 11:00 pm
- Location: north london
Last edited by win on Thu Jan 11, 2007 10:18 am, edited 1 time in total.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Without seing a pic of the underside with the exhaust currently fitted mate its very hard to offer any advise.
The obvious answer at the moment would be to get it on a ramp and see if its fitted properly and if not re-align it!
The obvious answer at the moment would be to get it on a ramp and see if its fitted properly and if not re-align it!
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
if got the same problem mate. ive got a powerflow zaust system too. my cars lowered 60\40 and the centre box hits bumps all the time. or at leats the bolts do. i was thinking of getting the box removed and replaced with piping. (mine's too quiet anyway). only problem with this is that the car will need remapping after removal i think- stand to be corrected on that though
just a pain in the arse though really- removing the centre box seems the only way to prevent it scraping on mine
just a pain in the arse though really- removing the centre box seems the only way to prevent it scraping on mine
-
win
- E30 Zone Newbie

- Posts: 87
- Joined: Sun May 28, 2006 11:00 pm
- Location: north london
A friend of mine said it may be possible to heat it up and bend it into place but i'm not sure. As for removing the centre box, i don't know if it would need remapping or not. I'm sure another zoner should know.
Win
Win
