Right sorry for posting again after binging at the weekend when my engine was bust - I'm trying to get a new windscreen in and I'm having a fair bit of bother.
Is there a knack for getting it into the rubber, as I've got it all in apart from at the top passenger side corner - it needs to be shifted about a mm towards the drivers side and it should plop in but it is refusing to budge, so I think I'm going to have to take it out and start again.
Argh, something has just this second occured to me! It has a plastic ring stuck to it at the top in the centre of the glass - is this where the rear view mirror goes on the cabrio? And if so, is the cabrio glass a different size? Was there any difference in size between the windscreens (e.g touring/coupe/cabrio, facelift etc.), as this is a really tight fit and doesn't really seem to want to go in.
And whats the best way to refit the locking strip without the special tool?
Windscreen replacement
Moderator: martauto
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Try this - it might work if I've understood your post correctly - put some neat screenwash on the rubber around where the windscreen slots in. Get someone to help you lower the screen into place - bottom end in first. Using a plastic knife, or similar blunt tool, inserted between screen and rubber on the outside of the car and chase it around as you drop the screen in. You and your helper can do this both sides.
Fitting the locking strip in without the special tool is something I can't help with but I think you could improvise and use a bent coat hanger to replicate the shape of the special tool - a bit like this tool
http://www.mgbreakers.com/MGMart%20phot ... /wtool.jpg
Fitting the locking strip in without the special tool is something I can't help with but I think you could improvise and use a bent coat hanger to replicate the shape of the special tool - a bit like this tool
http://www.mgbreakers.com/MGMart%20phot ... /wtool.jpg

-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
Im not sure if the windscreens are a different size between models, but it is pretty easy to fit the locking strip with a flat screwdriver and some washing up liquid.
the top of the glass shouldnt have any "plastic ring stuck to it at the top in the centre of the glass"
the top of the glass shouldnt have any "plastic ring stuck to it at the top in the centre of the glass"

-
Two_Sheds
- E30 Zone Newbie

- Posts: 102
- Joined: Thu Oct 26, 2006 11:00 pm
- Location: Stroud/Fife
Brilliant, thanks very much - I reckon I may have the wrong windscreen, but like I said, it almost fits so I'll give it another go tommorow.
Bent coathanger - ingenious!
Bent coathanger - ingenious!
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
The cabrio does have the mirror fitted to screen though so the plastic ring maybe that fixing place.

