***Wishbones***
Moderator: martauto
-
BIGJO
- E30 Zone Camper

- Posts: 1191
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: N.W London & Brighton
Doing some work on my Sport & was considering changing the wishbones. Now, i'm not too sure whether I should go for BMW, GSF or any other manufacturer? Wondering if anyone actually has experience.
Regards, BJ.
Regards, BJ.
-
aus325
- E30 Zone Newbie

- Posts: 145
- Joined: Sun Mar 13, 2005 11:00 pm
- Location: Hobart, Tasmania, Australia
Front control arms are produced by a few different companies... LEMFOERDER, OCAP, and MEYLE.
I chose Meyle when I replaced mine, the Lemfoerder's where quite a bit more expensive (I'm not exactly sure what the differences are, maybe better quality ball joints?). The original items on my car were Meyle.
I chose Meyle when I replaced mine, the Lemfoerder's where quite a bit more expensive (I'm not exactly sure what the differences are, maybe better quality ball joints?). The original items on my car were Meyle.
-
BIGJO
- E30 Zone Camper

- Posts: 1191
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: N.W London & Brighton
Cool. That helps, thanks fella.
Anyone have any knowledge about these manufacturers? And how they compare with BMW?
Regards, BJ.
Anyone have any knowledge about these manufacturers? And how they compare with BMW?
Regards, BJ.
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
Original BMW wishbones are Lemforder or Febi
www.eurocarparts.co.uk sell the Lemforder (the more expensive of the 2 types they sell) and www.gsfcarparts.com sell Febi, again the more expensive of the 2 types they sell.
These makes have better longer lasting balljoints than the other cheaper makes.
Don't forget that you'll need the wishbone bushes too.
Cheers,
Iain T
www.eurocarparts.co.uk sell the Lemforder (the more expensive of the 2 types they sell) and www.gsfcarparts.com sell Febi, again the more expensive of the 2 types they sell.
These makes have better longer lasting balljoints than the other cheaper makes.
Don't forget that you'll need the wishbone bushes too.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
BIGJO
- E30 Zone Camper

- Posts: 1191
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: N.W London & Brighton
I've ordered the Powerflex bushes from Sal but contemplating on which wishbones to go for.
Which manufacturer is the best? Assuming Lemforder & Febi?
Regards, BJ.
Which manufacturer is the best? Assuming Lemforder & Febi?
Regards, BJ.
-
GDBN
- E30 Zone Camper

- Posts: 1415
- Joined: Fri Apr 08, 2005 11:00 pm
- Location: Copenhagen
You'll be fine with Febi.

I deserve 6 of the best ...
-
MadE30mike
- E30 Zone Regular

- Posts: 668
- Joined: Mon Jul 17, 2006 11:00 pm
- Location: FIFE(Scotland)
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Powerflex?
they have a nice habit of breaking rather quickly and un expectedly 
M3 solid bushes job done
M3 solid bushes job done
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
You changing the balljoints or the wishbones BigJo?
New wishbones, also known as control arms, come with new balljoints installed in them already.
4 x balljoints (2 for each arm) costs almost as much as new wishbones when you factor in paying to have them pressed into your old wishbones. It's only worth doing if you have special (alloy) wishbones like the M3's and late 325i Tourings have.
You will also want to change the control arm 'mounting bracket' bush, also called the lollipop. There are choices there such as regular, solid and offest solid. You'll have to press those into your old bracket as they do not come with bushes in them and are damn strong anyway so you shouldn't need new brackets.
Lemfoerder and Febi are both OEM suppliers to BMW so both are fine, though Lemfoerder seem to have produced more so maybe are a bit 'posher'. There are threads on here that explain the difference and maybe someone with more knowledge can give you details.
Poweflex bushes are pretty stiff and may last longer - they are kind of aimed more at track users and I've heard are noisy as they transmit more vibration/sound.
Don't forget to get your wheels tracked after all of this straight away.
New wishbones, also known as control arms, come with new balljoints installed in them already.
4 x balljoints (2 for each arm) costs almost as much as new wishbones when you factor in paying to have them pressed into your old wishbones. It's only worth doing if you have special (alloy) wishbones like the M3's and late 325i Tourings have.
You will also want to change the control arm 'mounting bracket' bush, also called the lollipop. There are choices there such as regular, solid and offest solid. You'll have to press those into your old bracket as they do not come with bushes in them and are damn strong anyway so you shouldn't need new brackets.
Lemfoerder and Febi are both OEM suppliers to BMW so both are fine, though Lemfoerder seem to have produced more so maybe are a bit 'posher'. There are threads on here that explain the difference and maybe someone with more knowledge can give you details.
Poweflex bushes are pretty stiff and may last longer - they are kind of aimed more at track users and I've heard are noisy as they transmit more vibration/sound.
Don't forget to get your wheels tracked after all of this straight away.
Last edited by Royalratch on Thu Jan 11, 2007 6:05 pm, edited 1 time in total.
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
who stocks m3 solid bushes?
whats the performance difference between these and stock and powerflex?
Whats the cost difference?
whats the performance difference between these and stock and powerflex?
Whats the cost difference?
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
RoyalRatch thanks, answered some of my questions before I posted!
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
M3 bushes are rubber.
Powerflex are a polymer/plastic material.
M3 bushes are about £40 a pair? You can also use E36 one's.
The other decision is whether to get offset or centered. Offsets tweak out your camber/steering geometry a bit and give better turn in and feel, though I can't claim to know too much about that.
I installed solids because I wanted a stronger/tauter set-up.
Powerflex are a polymer/plastic material.
M3 bushes are about £40 a pair? You can also use E36 one's.
The other decision is whether to get offset or centered. Offsets tweak out your camber/steering geometry a bit and give better turn in and feel, though I can't claim to know too much about that.
I installed solids because I wanted a stronger/tauter set-up.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Royalratshit, you can't press new ball joints into an M3 aluminium arm, it will break as they are too soft. Only on the standard Iron arms can you do this.
M3 solid ones? BMW only i'm afraid. The bmw bush is the best as it will last the longest, give the best ride and best steering feel as it alters castor slightly, plus something else i can't remember. I paid around £90 for a pair and that was a trade price also! But they are worth it
The only downfall for want of a better word is it moves the front wheels back, some people think this looks funny when the wheels are pointing straight ahead. The rims can rub a little with big aftermarket wheels on full lock. they are quite expensive too, but you will never have to replace them tbh
powerflex? hmmm i can think of 3 cars which had these fitted and they all feel apart literally within weeks of being fitted. None of these cars went on track after they were fitted before someone asks! Powerflex are just crap if you ask me.
Stock are ok if your not worried about lowering or track days or cornering faster than the stock setup allows, plus they are not expensive either.
M3 solid ones? BMW only i'm afraid. The bmw bush is the best as it will last the longest, give the best ride and best steering feel as it alters castor slightly, plus something else i can't remember. I paid around £90 for a pair and that was a trade price also! But they are worth it
The only downfall for want of a better word is it moves the front wheels back, some people think this looks funny when the wheels are pointing straight ahead. The rims can rub a little with big aftermarket wheels on full lock. they are quite expensive too, but you will never have to replace them tbh
powerflex? hmmm i can think of 3 cars which had these fitted and they all feel apart literally within weeks of being fitted. None of these cars went on track after they were fitted before someone asks! Powerflex are just crap if you ask me.
Stock are ok if your not worried about lowering or track days or cornering faster than the stock setup allows, plus they are not expensive either.
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
So when M3 balljoints go you have to replace the whole wishbone?
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
and at over £200 per arm it's not very funny!
thats why no touring on the roads today have them fitted still when you can get a standard arm for £38 from GSF
thats why no touring on the roads today have them fitted still when you can get a standard arm for £38 from GSF
-
Simon
- E30 Zone Team Member

- Posts: 14939
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: South Wales
Even most M3's have the steel arms now
The M3 bushes can also be bought from C3, though I haven't checked the difference in price from BMW.
The M3 bushes can also be bought from C3, though I haven't checked the difference in price from BMW.

-
BIGJO
- E30 Zone Camper

- Posts: 1191
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: N.W London & Brighton
Who are C3 Simon?
Am I to go for M3 bushes over Powerflex? With either Lemforder or Febi wishbones?
Regards, BJ.
Am I to go for M3 bushes over Powerflex? With either Lemforder or Febi wishbones?
Regards, BJ.
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Sal will say powerflex but it's up to you badboy, we can only advise
be warned C3 sell some non genuine sh!te, check before you buy
be warned C3 sell some non genuine sh!te, check before you buy
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
dips told me that you is a way of getting the old bushes out and the new bushes into the alloy wishbones.
you have to use the old hot and cold method apparently, using a hot air gun or blow torch (very carefully, mind you) and a freezer. Like interferance fitting, but using the opposite method to remove it i suppose
i dont know if this definately works, i was a bit sceptical myself, but you never know!!
you have to use the old hot and cold method apparently, using a hot air gun or blow torch (very carefully, mind you) and a freezer. Like interferance fitting, but using the opposite method to remove it i suppose
i dont know if this definately works, i was a bit sceptical myself, but you never know!!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
well it's worth a punt on some knackered arms. I thought something like that aswell once upon a time. Heat them up on removal. But you would also want the arms hot for refitting. Surely it's less likely to fracture if the arm is red hot. Maybe they will distort. Aluminium is a bitch sometimes
but is it worth it for half a kilo! i know it's more really.
Stu one phrase "staff discount"
but is it worth it for half a kilo! i know it's more really.
Stu one phrase "staff discount"
-
Jamesb318is
- E30 Zone Regular

- Posts: 620
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: East Sussex
I've had powerflex bushes on my car for well over a year now with absolutely no problems - must have been a faulty batch?
I'm pretty sure the eccentric bushes push the wheels foward in the arch aswell.
I'm pretty sure the eccentric bushes push the wheels foward in the arch aswell.


-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
beardymat
- E30 Zone Squatter

- Posts: 1979
- Joined: Tue Jun 14, 2005 11:00 pm
- Location: sheffield, city of steel, and rust apparently
i know someone who has these fitted and his wheels are further forward, has he got these fitted the wrong way round (offset hole to the outside of the car instead of the inside)Simon13 wrote: The only downfall for want of a better word is it moves the front wheels back, some people think this looks funny when the wheels are pointing straight ahead. The rims can rub a little with big aftermarket wheels on full lock. they are quite expensive too, but you will never have to replace them tbh
No longer self employed but still available for welding duties.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I read somewhere that there can be fatigue problems with elderly aluminium arms as well.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Forged Aluminum does not react well to rapid heating and cooling. If there are any cracks or blemishes in the wishbone, no matter how small, they will be amplified.stuartgallafant wrote:dips told me that you is a way of getting the old bushes out and the new bushes into the alloy wishbones.
you have to use the old hot and cold method apparently, using a hot air gun or blow torch (very carefully, mind you) and a freezer. Like interferance fitting, but using the opposite method to remove it i suppose
i dont know if this definately works, i was a bit sceptical myself, but you never know!!
£200 is no joke for each arm either. I can't believe BMW would make them and not make the rubber replaceable? Are the alloy arms supposed to only last the life of the rubber, like proper Motorsport parts?
I mean, most BMW's from E36 on have alloy wishbones don't they?
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Rubber bush is replaceable. It's the two metal balljoints that aren't.Royalratch wrote:[. I can't believe BMW would make them and not make the rubber replaceable? Are the alloy arms supposed to only last the life of the rubber, like proper Motorsport parts?
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
The balljoints on M3 wishbones are metal?:eek:
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon



