Thanks.
Seats, Subframes and Harnesses
Moderator: martauto
-
oldbimmer
- E30 Zone Newbie
- Posts: 129
- Joined: Tue May 03, 2005 11:00 pm
- Location: Essex
I'll bear that in mind!!
Thanks.
Thanks.
-
Cabrio
- E30 Zone Camper
- Posts: 1031
- Joined: Wed Aug 03, 2005 11:00 pm
Worth checking out the group buy by Kos on Safetydevices roll cages as they will fit in and keep the sunroof also he might also know people who can help with seats and harnesses as he is building an awesome track day M3
Cheers
Cheers
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
-
Theo
- Old Skooler
- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
LOL - cheeky barsteward!
Seeing as this thread is still going...
I've since acquired a safety devices 6pt roll cage for the e30, which has a horizontal bar welded in on the rear cage in addition to the diagonal. Would this extra horizontal bar be the best place to have the harness mounts?
Seeing as this thread is still going...
I've since acquired a safety devices 6pt roll cage for the e30, which has a horizontal bar welded in on the rear cage in addition to the diagonal. Would this extra horizontal bar be the best place to have the harness mounts?
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
What like this ?horizontal bar welded in on the rear cage in addition to the diagonal. Would this extra horizontal bar be the best place to have the harness mounts?
-
Theo
- Old Skooler
- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Yes, vey much like that! The rest of that cage looks a bit tasty though.
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
[quote=
CAN YOU FIT A CAGE TO A CAR WITH A SUNROOF?? or do you have to remove the cartridge and weld it up?
[/quote]
I have fitted a SD one and it is made for a sunroof model, So it sits just below the headlining..
.. GGoing to put the front in thursday..
CAN YOU FIT A CAGE TO A CAR WITH A SUNROOF?? or do you have to remove the cartridge and weld it up?
[/quote]I have fitted a SD one and it is made for a sunroof model, So it sits just below the headlining..
.. GGoing to put the front in thursday..M30 Tech 1 Touring on gas.
-
northloop
- E30 Zone Regular
- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
The best place for the harnesses is on the harness bars as you suggest. If you mount them via the floor the forces can go against you in a bad accident, pulling back on the mountings and braking your back.Theo325 wrote:Yes, vey much like that! The rest of that cage looks a bit tasty though.
That's the same cage as I have