i have striped out my carpets to get all the rust sorted on my 325i. as my carpet was soaked i wanted to find out where the water was coming in, so i got a hose pipe out and sprayed the outside of the car and sure enough the water poored in behind the glove box. i soon found out that the water was going in the vents under the front window. i had a poke with a skrew driver and found this hole full of water
http://www.putfile.com/pic.php?img=4474304
can this be fixed!
my rusty wet hole :O) and wet carpets!
Moderator: martauto
-
bri_on_1
- E30 Zone Newbie

- Posts: 97
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: nr newmarket east anglia
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Just replied to your other post!
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
that can be repaired with a bit of plate, it is where the water is coming in, probably under the fusebox area which is the pain in the arse.
I would remove the glovebox and then run your hand up where you can see the water has trickled down, hopefully you will not be able to get 4 fingers in your rusty hole like I could, also it had rotted through into the passenger wheel arch area
I would remove the glovebox and then run your hand up where you can see the water has trickled down, hopefully you will not be able to get 4 fingers in your rusty hole like I could, also it had rotted through into the passenger wheel arch area
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Looks like the big square shaped grommet is leaking from that trail of water
-
bri_on_1
- E30 Zone Newbie

- Posts: 97
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: nr newmarket east anglia
is this gromit you are talking about behind behind the glove box?DanThe wrote:Looks like the big square shaped grommet is leaking from that trail of water
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Yes, the main loom from the fusebox passes through it
-
bri_on_1
- E30 Zone Newbie

- Posts: 97
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: nr newmarket east anglia
ok thanks, i will take a look on the weekend when its daylight :O) my brother is doing all the welding for me so it will save me a few £Â£Ã‚£ my sills are rotting away! any idea on a rough price on a pair? and how do i drain the water out as the sills are full. if you look in the hole on the pic you can see the water in there 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
The sills have drain holes which must be blocked
-
bri_on_1
- E30 Zone Newbie

- Posts: 97
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: nr newmarket east anglia
sory for the questions but where are they located?
