Can I fix demisting windscreen, or is it replacement jobbie?

Need technical Q/A then you're in the right place

Moderator: martauto

Dr Firefly
E30 Zone Doctor
E30 Zone Doctor
Posts: 1027
Joined: Fri Apr 07, 2006 11:00 pm

Post Mon Jan 08, 2007 7:42 pm

Is it true that it's possible to repair broken filaments in a heated rear windscreen? Just as mine only has two working filaments now :(
User avatar
JonDubber
E30 Zone Newbie
E30 Zone Newbie
Posts: 95
Joined: Wed Nov 15, 2006 11:00 pm

Post Mon Jan 08, 2007 7:59 pm

There's this stuff you can get from Comma I think, you mask the lines up and paint it on with a little brush. Can't remember the name of it for the life of me, but it is out there...
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Mon Jan 08, 2007 8:03 pm

If you have only two working filaments it's got to be easier to swap a replacement glass in!
Image
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Mon Jan 08, 2007 9:17 pm

You can use a product called granville electro connector. Basicly its conductive paint.
Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Mon Jan 08, 2007 9:18 pm

Chris-W wrote:If you have only two working filaments it's got to be easier to swap a replacement glass in!
:lol:

i agree...
Image
Dr Firefly
E30 Zone Doctor
E30 Zone Doctor
Posts: 1027
Joined: Fri Apr 07, 2006 11:00 pm

Post Mon Jan 08, 2007 11:25 pm

I'm looking into swapping it - but didn't know how much work that would involve. And it'd need to be one that worked... are there many about? Reasonable prices?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jan 08, 2007 11:36 pm

To check for a working one, connect 12 volts across it, and probe each line with a volt meter near the middle.
Should be about six volts relative to either end on each one.
Take care not to damage the tracks with the meter probe!